[U-Boot] [PATCH v2 3/7] x86: qemu: Enable I/O APIC chip select on PIIX3
Bin Meng
bmeng.cn at gmail.com
Tue Jul 21 14:15:22 CEST 2015
The PIIX3 chipset does not integrate an I/O APIC, instead it supports
connecting to an external I/O APIC which needs to be enabled manually.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/x86/cpu/qemu/pci.c | 7 ++++++-
arch/x86/include/asm/arch-qemu/qemu.h | 6 +++++-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c
index 1a9140b..ab93e76 100644
--- a/arch/x86/cpu/qemu/pci.c
+++ b/arch/x86/cpu/qemu/pci.c
@@ -50,7 +50,7 @@ void board_pci_setup_hose(struct pci_controller *hose)
int board_pci_post_scan(struct pci_controller *hose)
{
int ret = 0;
- u16 device;
+ u16 device, xbcs;
int pam, i;
pci_dev_t vga;
ulong start;
@@ -82,6 +82,11 @@ int board_pci_post_scan(struct pci_controller *hose)
*/
x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN);
x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN);
+
+ /* Enable I/O APIC */
+ xbcs = x86_pci_read_config16(PIIX_ISA, XBCS);
+ xbcs |= APIC_EN;
+ x86_pci_write_config16(PIIX_ISA, XBCS, xbcs);
}
/*
diff --git a/arch/x86/include/asm/arch-qemu/qemu.h b/arch/x86/include/asm/arch-qemu/qemu.h
index 5cbffff..8c8e4ac 100644
--- a/arch/x86/include/asm/arch-qemu/qemu.h
+++ b/arch/x86/include/asm/arch-qemu/qemu.h
@@ -13,10 +13,14 @@
#define PAM_NUM 7
#define PAM_RW 0x33
+/* X-Bus Chip Select Register */
+#define XBCS 0x4e
+#define APIC_EN (1 << 8)
+
/* IDE Timing Register */
#define IDE0_TIM 0x40
#define IDE1_TIM 0x42
-#define IDE_DECODE_EN 0x8000
+#define IDE_DECODE_EN (1 << 15)
/* I/O Ports */
#define CMOS_ADDR_PORT 0x70
--
1.8.2.1
More information about the U-Boot
mailing list