[U-Boot] [PATCH 02/19] ARM: zynq: DT: Add missing nodes to DTSI

[Michal Simek]

Add ADC, CAN, GPIO, MC, DMA, DEVCFG, USB, Watchdog IPs to DTSI.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Sync with the kernel.

---
 arch/arm/dts/zynq-7000.dtsi | 100 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 6faac4044627..fc5dd4d4a38e 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -51,6 +51,48 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		adc: adc at f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can at e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can at e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio at e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
 		i2c0: i2c at e0004000 {
 			compatible = "cdns,i2c-r1p10";
 			status = "disabled";
@@ -91,6 +133,11 @@
 			cache-level = <2>;
 		};
 
+		mc: memory-controller at f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
 		uart0: serial at e0000000 {
 			compatible = "xlnx,xuartps";
 			status = "disabled";
@@ -199,6 +246,29 @@
 			};
 		};
 
+		dmac_s: dmac at f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <4>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg at f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+		};
+
 		global_timer: timer at f8f00200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xf8f00200 0x20>;
@@ -222,6 +292,7 @@
 			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
 		};
+
 		scutimer: timer at f8f00600 {
 			interrupt-parent = <&intc>;
 			interrupts = < 1 13 0x301 >;
@@ -229,5 +300,34 @@
 			reg = < 0xf8f00600 0x20 >;
 			clocks = <&clkc 4>;
 		} ;
+
+		usb0: usb at e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb at e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog at f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
 	};
 };
-- 
2.3.5