[U-Boot] [PATCH 2/2] zynqmp: Add support for IP detection via SLCR

[Michal Simek]

SLCR can be used for IP configuration setting.
Add SLCR skeleton to enable run time checking.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/cpu/armv8/zynqmp/Makefile          |  1 +
 arch/arm/cpu/armv8/zynqmp/slcr.c            | 63 +++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-zynqmp/hardware.h |  9 +++++
 3 files changed, 73 insertions(+)
 create mode 100644 arch/arm/cpu/armv8/zynqmp/slcr.c

diff --git a/arch/arm/cpu/armv8/zynqmp/Makefile b/arch/arm/cpu/armv8/zynqmp/Makefile
index efab5eabc97b..d0ed2223ff79 100644
--- a/arch/arm/cpu/armv8/zynqmp/Makefile
+++ b/arch/arm/cpu/armv8/zynqmp/Makefile
@@ -8,3 +8,4 @@
 obj-y	+= clk.o
 obj-y	+= cpu.o
 obj-$(CONFIG_MP)	+= mp.o
+obj-y	+= slcr.o
diff --git a/arch/arm/cpu/armv8/zynqmp/slcr.c b/arch/arm/cpu/armv8/zynqmp/slcr.c
new file mode 100644
index 000000000000..713e9a62c019
--- /dev/null
+++ b/arch/arm/cpu/armv8/zynqmp/slcr.c
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+};
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, i, j;
+	int mio = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index c9dc49d78317..15bd519bfbe1 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -55,6 +55,15 @@ struct iou_scntr {
 #define EMMC_MODE	0x00000006
 #define JTAG_MODE	0x00000000
 
+#define ZYNQMP_IOU_SLCR_BASEADDR	0xFF180000
+
+struct iou_slcr_regs {
+	u32 mio_pin[78];
+	u32 reserved[442];
+};
+
+#define slcr_base ((struct iou_slcr_regs *)ZYNQMP_IOU_SLCR_BASEADDR)
+
 #define ZYNQMP_RPU_BASEADDR	0xFF9A0000
 
 struct rpu_regs {
-- 
2.3.5