[U-Boot] [PATCH 15/48] pci: Use debug() instead of DEBUGF() in pci_auto.c
Simon Glass
sjg at chromium.org
Wed Jul 22 17:49:07 CEST 2015
This file does not need its own way of doing debug(). Clean it up to use the
new way.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/pci/pci_auto.c | 48 +++++++++++++++++++++++-------------------------
1 file changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index a7af8cb..7ff282b 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -14,12 +14,6 @@
#include <errno.h>
#include <pci.h>
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
@@ -50,20 +44,21 @@ int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
pci_addr_t addr;
if (!res) {
- DEBUGF("No resource");
+ debug("No resource");
goto error;
}
addr = ((res->bus_lower - 1) | (size - 1)) + 1;
if (addr - res->bus_start + size > res->size) {
- DEBUGF("No room in resource");
+ debug("No room in resource");
goto error;
}
res->bus_lower = addr + size;
- DEBUGF("address=0x%llx bus_lower=0x%llx", (u64)addr, (u64)res->bus_lower);
+ debug("address=0x%llx bus_lower=0x%llx", (unsigned long long)addr,
+ (unsigned long long)res->bus_lower);
*bar = addr;
return 0;
@@ -122,7 +117,8 @@ void pciauto_setup_device(struct pci_controller *hose,
bar_res = io;
#endif
- DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size);
+ debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
+ bar_nr, (unsigned long long)bar_size);
} else {
if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64) {
@@ -152,7 +148,8 @@ void pciauto_setup_device(struct pci_controller *hose,
bar_res = mem;
#endif
- DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size);
+ debug("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ",
+ bar_nr, (unsigned long long)bar_size);
}
#ifndef CONFIG_PCI_ENUM_ONLY
@@ -179,7 +176,7 @@ void pciauto_setup_device(struct pci_controller *hose,
cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
- DEBUGF("\n");
+ debug("\n");
bar_nr++;
}
@@ -193,14 +190,15 @@ void pciauto_setup_device(struct pci_controller *hose,
pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
if (bar_response) {
bar_size = -(bar_response & ~1);
- DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size);
+ debug("PCI Autoconfig: ROM, size=%#x, ",
+ (unsigned int)bar_size);
if (pciauto_region_allocate(mem, bar_size,
&bar_value) == 0) {
pci_hose_write_config_dword(hose, dev, rom_addr,
bar_value);
}
cmdstat |= PCI_COMMAND_MEMORY;
- DEBUGF("\n");
+ debug("\n");
}
}
@@ -411,7 +409,7 @@ void pciauto_config_init(struct pci_controller *hose)
if (hose->pci_mem) {
pciauto_region_init(hose->pci_mem);
- DEBUGF("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n"
+ debug("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory [%llx-%llxx]\n",
(u64)hose->pci_mem->bus_start,
(u64)(hose->pci_mem->bus_start + hose->pci_mem->size - 1),
@@ -422,7 +420,7 @@ void pciauto_config_init(struct pci_controller *hose)
if (hose->pci_prefetch) {
pciauto_region_init(hose->pci_prefetch);
- DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n"
+ debug("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory [%llx-%llx]\n",
(u64)hose->pci_prefetch->bus_start,
(u64)(hose->pci_prefetch->bus_start +
@@ -435,7 +433,7 @@ void pciauto_config_init(struct pci_controller *hose)
if (hose->pci_io) {
pciauto_region_init(hose->pci_io);
- DEBUGF("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n"
+ debug("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n"
"\t\tPhysical Memory: [%llx-%llx]\n",
(u64)hose->pci_io->bus_start,
(u64)(hose->pci_io->bus_start + hose->pci_io->size - 1),
@@ -475,8 +473,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
switch (class) {
case PCI_CLASS_BRIDGE_PCI:
- DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n",
- PCI_DEV(dev));
+ debug("PCI Autoconfig: Found P2P bridge, device %d\n",
+ PCI_DEV(dev));
pciauto_setup_device(hose, dev, 2, pci_mem,
pci_prefetch, pci_io);
@@ -512,8 +510,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
pciauto_setup_device(hose, dev, 0, pci_mem,
pci_prefetch, pci_io);
- DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
- PCI_DEV(dev));
+ debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
+ PCI_DEV(dev));
#ifndef CONFIG_DM_PCI
hose->current_busno++;
@@ -522,8 +520,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
case PCI_CLASS_BRIDGE_OTHER:
- DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
- PCI_DEV(dev));
+ debug("PCI Autoconfig: Skipping bridge device %d\n",
+ PCI_DEV(dev));
break;
#endif
#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
@@ -534,14 +532,14 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
* device claiming resources io/mem/irq.. we only allow for
* the PIMMR window to be allocated (BAR0 - 1MB size)
*/
- DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
+ debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
break;
#endif
case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
- DEBUGF("PCI AutoConfig: Found PowerPC device\n");
+ debug("PCI AutoConfig: Found PowerPC device\n");
default:
pciauto_setup_device(hose, dev, 6, pci_mem,
--
2.4.3.573.g4eafbef
More information about the U-Boot
mailing list