[U-Boot] [PATCH v3 1/4] sunxi: nand: Add pinmux and clock settings for NAND support

[Piotr Zierhoffer]

From: Karol Gugala <kgugala at antmicro.com>

To enable NAND flash in sunxi SPL,
pins 0-6, 8-22 and 24 on port C are configured.

Signed-off-by: Karol Gugala <kgugala at antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer at antmicro.com>
---

Changes in v3:
- moved pinmux and clock to board level
- code cleanup with significant size reduction

Changes in v2: None

 arch/arm/include/asm/arch-sunxi/clock_sun4i.h |  2 ++
 arch/arm/include/asm/arch-sunxi/gpio.h        |  1 +
 board/sunxi/board.c                           | 27 +++++++++++++++++++++++++++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index 58aff16..01d3e28 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -267,6 +267,8 @@ struct sunxi_ccm_reg {
 #define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2
 #define CCM_MBUS_CTRL_GATE (0x1 << 31)
 
+#define CCM_NAND_CTRL_ENABLE		(0x1 << 31)
+
 #define CCM_MMC_CTRL_M(x)		((x) - 1)
 #define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
 #define CCM_MMC_CTRL_N(x)		((x) << 16)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 8e67b3b..8382101 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -158,6 +158,7 @@ enum sunxi_gpio_number {
 #define SUN8I_GPB_UART2		2
 #define SUN8I_A33_GPB_UART0	3
 
+#define SUNXI_GPC_NAND		2
 #define SUNXI_GPC_SDC2		3
 #define SUN6I_GPC_SDC3		4
 
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index ed60e74..096b5c3 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -108,6 +108,28 @@ int dram_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SPL_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
+static void nand_pinmux_setup(void)
+{
+	unsigned int pin;
+	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+	for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+	sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_NAND);
+}
+
+static void nand_clock_setup(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0));
+	setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1);
+}
+#endif
+
 #ifdef CONFIG_GENERIC_MMC
 static void mmc_pinmux_setup(int sdc)
 {
@@ -434,6 +456,11 @@ void sunxi_board_init(void)
 	power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
 #endif
 
+#ifdef CONFIG_SPL_NAND_SUNXI
+	nand_pinmux_setup();
+	nand_clock_setup();
+#endif
+
 	printf("DRAM:");
 	ramsize = sunxi_dram_init();
 	printf(" %lu MiB\n", ramsize >> 20);
-- 
2.3.6