[U-Boot] [PATCH v2] arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM

[Markus Niebel]

Hello Stefan,

sorry for replaying late.

Am 06.07.2015 um 13:36 schrieb Stefan Roese:
> This patch adds support for the "OHB System AG" baseboard
> with is equipped with the TQMa6S SoM.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>

Acked-by Markus Niebel <Markus.Niebel at tq-group.com>

> Cc: Markus Niebel <Markus.Niebel at tq-group.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> v2:
> - board_eth_init() simplified as suggested by Markus
> - PHY reset GPIO only defined once as suggested by Markus
> - All GPIOs are now requested before usage as suggested by Markus
> - Used new tqma6 Kconfig IF as suggested by Markus
>