[U-Boot] [PATCH 11/12] sf: kconfig: add kconfig options for spi flashes

[Igor Grinberg]

On 07/23/15 17:19, Nikita Kiryanov wrote:
> Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig.
> 
> Cc: Jagan Teki <jteki at openedev.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
>  configs/cm_fx6_defconfig |  8 ++++++++
>  drivers/mtd/spi/Kconfig  | 44 ++++++++++++++++++++++++++++++++++++++++++++
>  include/configs/cm_fx6.h |  8 --------
>  3 files changed, 52 insertions(+), 8 deletions(-)
> 
> diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
> index f0fd48c..2aba359 100644
> --- a/configs/cm_fx6_defconfig
> +++ b/configs/cm_fx6_defconfig
> @@ -13,6 +13,14 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
>  CONFIG_CMD_DHCP=y
>  CONFIG_CMD_PING=y
>  CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_ATMEL=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH_WINBOND=y
>  CONFIG_CMD_SF=y
>  CONFIG_CMD_I2C=y
>  CONFIG_USB=y
> diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
> index 4f0c040..8b730ff 100644
> --- a/drivers/mtd/spi/Kconfig
> +++ b/drivers/mtd/spi/Kconfig
> @@ -42,6 +42,50 @@ config SPI_FLASH_BAR
>  	  Bank/Extended address registers are used to access the flash
>  	  which has size > 16MiB in 3-byte addressing.
>  
> +if SPI_FLASH
> +
> +config SPI_FLASH_ATMEL
> +	bool "Atmel SPI flash support"
> +	help
> +	  Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
> +
> +config SPI_FLASH_EON
> +	bool "EON SPI flash support"
> +	help
> +	  Add support for various EON SPI flash chips (EN25xxx)
> +
> +config SPI_FLASH_GIGADEVICE
> +	bool "GigaDevice SPI flash support"
> +	help
> +	  Add support for various GigaDevice SPI flash chips (GD25xxx)
> +
> +config SPI_FLASH_MACRONIX
> +	bool "Macronix SPI flash support"
> +	help
> +	  Add support for various Macronix SPI flash chips (MX25Lxxx)
> +
> +config SPI_FLASH_SPANSION
> +	bool "Spansion SPI flash support"
> +	help
> +	  Add support for various Spansion SPI flash chips (S25FLxxx)
> +
> +config SPI_FLASH_STMICRO
> +	bool "STMicro SPI flash support"
> +	help
> +	  Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
> +
> +config SPI_FLASH_SST
> +	bool "SST SPI flash support"
> +	help
> +	  Add support for various SST SPI flash chips (SST25xxx)
> +
> +config SPI_FLASH_WINBOND
> +	bool "Winbond SPI flash support"
> +	help
> +	  Add support for various Winbond SPI flash chips (W25xxx)
> +
> +endif
> +
>  config SPI_FLASH_DATAFLASH
>  	bool "AT45xxx DataFlash support"
>  	depends on SPI_FLASH && DM_SPI_FLASH
> diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
> index 059004c..bbd9f38 100644
> --- a/include/configs/cm_fx6.h
> +++ b/include/configs/cm_fx6.h
> @@ -162,14 +162,6 @@
>  /* SPI */
>  #define CONFIG_SPI
>  #define CONFIG_MXC_SPI
> -#define CONFIG_SPI_FLASH_ATMEL
> -#define CONFIG_SPI_FLASH_EON
> -#define CONFIG_SPI_FLASH_GIGADEVICE
> -#define CONFIG_SPI_FLASH_MACRONIX
> -#define CONFIG_SPI_FLASH_SPANSION
> -#define CONFIG_SPI_FLASH_STMICRO
> -#define CONFIG_SPI_FLASH_SST
> -#define CONFIG_SPI_FLASH_WINBOND
>  
>  /* NAND */
>  #ifndef CONFIG_SPL_BUILD
> 

-- 
Regards,
Igor.