[U-Boot] [PATCH 08/12] sunxi: USB EHCI Kconfig option instead of config define

[Hans de Goede]

Hi,

On 27-07-15 14:31, Paul Kocialkowski wrote:
> Hi,
>
> Le mercredi 22 juillet 2015 à 11:31 +0200, Hans de Goede a écrit :
>> Hi,
>>
>> On 22-07-15 10:45, Paul Kocialkowski wrote:
>>> This makes sunxi boards use the USB_EHCI_HCD Kconfig option instead of defining
>>> USB_EHCI as a config define. This allows for more flexibility in enabling the
>>> controller and handling other Kconfig that may depend on USB EHCI.
>>>
>>> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
>>
>> This is already done by this commit:
>>
>> https://github.com/jwrdegoede/u-boot-sunxi/commit/a38b760f8805dfa7d9a0d60fa08802412b38f463
>>
>> My sunxi-wip tree has a whole bunch of patches to convert
>> the musb-host code to DM_USB so that the musb code can be built
>> in in host mode together with the ehci / uhci host drivers,
>> this is useful on boards where the musb is used in host only
>> mode such as the Mele A1000G quad where the musb is hooked up
>> to a usb2sata chip for the sata slot of the device.
>>
>> The dm-usb bits of these series are queued up in:
>> http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/next
>>
>> And I'm waiting for those to go upstream before submitting
>> a pull-req with the sunxi bits of this, which is also why:
>>
>> https://github.com/jwrdegoede/u-boot-sunxi/commit/a38b760f8805dfa7d9a0d60fa08802412b38f463
>>
>> Has not been merged yet as it sits on top of all this...
>
> Looks like everything was merged now. Can you confirm all the bits are
> in the main u-boot repository? if so, I'll just adapt my series as
> discussed on top of that.

Correct, everything is merged now, basing on top of master should be fine.

Regards,

Hans