[U-Boot] [PATCH V3 3/6] ARM: Tegra210: Add SoC code/include files for T210

[Stephen Warren]

On 07/24/2015 04:00 PM, Tom Warren wrote:
> All based off of Tegra124. As a Tegra210 board is brought
> up, these may change a bit to match the HW more closely,
> but probably 90% of this is identical to T124.
>
> Note that since T210 is a 64-bit build, it has no SPL
> component, and hence no cpu.c for Tegra210.

> diff --git a/arch/arm/include/asm/arch-tegra210/funcmux.h b/arch/arm/include/asm/arch-tegra210/funcmux.h

> +#include <asm/arch-tegra/funcmux.h>
> +
> +/* Configs supported by the func mux */
> +enum {
> +	FUNCMUX_DEFAULT = 0,	/* default config */
> +
> +	/* UART configs */
> +	FUNCMUX_UART1_UART1 = 0,
> +	FUNCMUX_UART4_UART4 = 0,
> +};

Since FUNCMUX_UART* aren't implemented, perhaps don't define them? you'd 
need to edit the next patch not to reference these symbols too.

Also, setup_uarts() should be fixed not to call funcmux_select() if 
uart_configs[i]==-1, since funcmux_select() will print an error if DEBUG 
is defined since those values aren't implemnted. Perhaps you could ifdef 
out the call for T210+ rather than checking the funcmux value.

This could all be done in a followon patch if you wanted.