[U-Boot] [PATCH 114/172] ddr: altera: Clean up rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay() part 4
Marek Vasut
marex at denx.de
Mon Jul 27 22:51:17 CEST 2015
This function is only invoked from rw_mgr_mem_calibrate_dqs_enable_calibration()
and at this point, it is just one level of indirection, so wrap the
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay() into
rw_mgr_mem_calibrate_dqs_enable_calibration() to get rid of the level
of indirection.
Signed-off-by: Marek Vasut <marex at denx.de>
---
drivers/ddr/altera/sequencer.c | 103 +++++++++++++++++++----------------------
1 file changed, 47 insertions(+), 56 deletions(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 6df534f..f696641 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -1766,57 +1766,6 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
return 1;
}
-/*
- * Try rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase across different
- * dq_in_delay values
- */
-static int
-rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay
-(const u32 rw_group, const u32 test_bgn)
-{
- /* We start at zero, so have one less dq to devide among */
- const u32 delay_step = IO_IO_IN_DELAY_MAX /
- (RW_MGR_MEM_DQ_PER_READ_DQS - 1);
- int found;
- u32 i, p, d, r;
-
- debug("%s:%d (%u,%u)\n", __func__, __LINE__, rw_group, test_bgn);
-
- /* Try different dq_in_delays since the DQ path is shorter than DQS. */
- for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
- r += NUM_RANKS_PER_SHADOW_REG) {
- for (i = 0, p = test_bgn, d = 0;
- i < RW_MGR_MEM_DQ_PER_READ_DQS;
- i++, p++, d += delay_step) {
- debug_cond(DLEVEL == 1,
- "%s:%d: g=%u r=%u i=%u p=%u d=%u\n",
- __func__, __LINE__, rw_group, r, i, p, d);
-
- scc_mgr_set_dq_in_delay(p, d);
- scc_mgr_load_dq(p);
- }
-
- writel(0, &sdr_scc_mgr->update);
- }
-
- found = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(rw_group);
-
- debug_cond(DLEVEL == 1,
- "%s:%d: g=%u found=%u; Reseting delay chain to zero\n",
- __func__, __LINE__, rw_group, found);
-
- for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
- r += NUM_RANKS_PER_SHADOW_REG) {
- scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
- writel(0, &sdr_scc_mgr->update);
- }
-
- if (!found)
- return -EINVAL;
-
- return 0;
-}
-
/* per-bit deskew DQ and center */
static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn,
uint32_t write_group, uint32_t read_group, uint32_t test_bgn,
@@ -2244,15 +2193,57 @@ static int rw_mgr_mem_calibrate_guaranteed_write(const u32 rw_group,
static int rw_mgr_mem_calibrate_dqs_enable_calibration(const u32 rw_group,
const u32 test_bgn)
{
- int ret;
-
/*
* Altera EMI_RM 2015.05.04 :: Figure 1-27
* DQS and DQS Eanble Signal Relationships.
*/
- ret = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay(
- rw_group, test_bgn);
- return ret;
+
+ /* We start at zero, so have one less dq to devide among */
+ const u32 delay_step = IO_IO_IN_DELAY_MAX /
+ (RW_MGR_MEM_DQ_PER_READ_DQS - 1);
+ int found;
+ u32 i, p, d, r;
+
+ debug("%s:%d (%u,%u)\n", __func__, __LINE__, rw_group, test_bgn);
+
+ /* Try different dq_in_delays since the DQ path is shorter than DQS. */
+ for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
+ r += NUM_RANKS_PER_SHADOW_REG) {
+ for (i = 0, p = test_bgn, d = 0;
+ i < RW_MGR_MEM_DQ_PER_READ_DQS;
+ i++, p++, d += delay_step) {
+ debug_cond(DLEVEL == 1,
+ "%s:%d: g=%u r=%u i=%u p=%u d=%u\n",
+ __func__, __LINE__, rw_group, r, i, p, d);
+
+ scc_mgr_set_dq_in_delay(p, d);
+ scc_mgr_load_dq(p);
+ }
+
+ writel(0, &sdr_scc_mgr->update);
+ }
+
+ /*
+ * Try rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase across different
+ * dq_in_delay values
+ */
+ found = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(rw_group);
+
+ debug_cond(DLEVEL == 1,
+ "%s:%d: g=%u found=%u; Reseting delay chain to zero\n",
+ __func__, __LINE__, rw_group, found);
+
+ for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
+ r += NUM_RANKS_PER_SHADOW_REG) {
+ scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
+ writel(0, &sdr_scc_mgr->update);
+ }
+
+ if (!found)
+ return -EINVAL;
+
+ return 0;
+
}
/**
--
2.1.4
More information about the U-Boot
mailing list