[U-Boot] [PATCH 11/15] x86: Tidy up the PIRQ routing code a little
Bin Meng
bmeng.cn at gmail.com
Tue Jul 28 09:49:00 CEST 2015
Hi Simon,
On Tue, Jul 28, 2015 at 5:47 AM, Simon Glass <sjg at chromium.org> wrote:
> This code could use a little tightening up. There is some repetition and
> an odd use of fdtdec_get_int_array().
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> arch/x86/cpu/irq.c | 40 +++++++++++++---------------------------
> 1 file changed, 13 insertions(+), 27 deletions(-)
>
> diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
> index 97dd000..9d1128a 100644
> --- a/arch/x86/cpu/irq.c
> +++ b/arch/x86/cpu/irq.c
> @@ -125,10 +125,10 @@ static int create_pirq_routing_table(void)
> return -EINVAL;
> }
>
> - ret = fdtdec_get_int_array(blob, node, "intel,pirq-link",
> - &irq_router.link_base, 1);
> - if (ret)
> + ret = fdtdec_get_int(blob, node, "intel,pirq-link", -1);
> + if (ret == -1)
> return ret;
> + irq_router.link_base = ret;
>
> irq_router.irq_mask = fdtdec_get_int(blob, node,
> "intel,pirq-mask", PIRQ_BITMAP);
> @@ -156,18 +156,13 @@ static int create_pirq_routing_table(void)
> }
>
> cell = fdt_getprop(blob, node, "intel,pirq-routing", &len);
> - if (!cell)
> - return -EINVAL;
> -
> - if ((len % sizeof(struct pirq_routing)) == 0)
> - count = len / sizeof(struct pirq_routing);
> - else
> + if (!cell || len % sizeof(struct pirq_routing))
> return -EINVAL;
> + count = len / sizeof(struct pirq_routing);
>
> - rt = malloc(sizeof(struct irq_routing_table));
> + rt = calloc(1, sizeof(struct irq_routing_table));
> if (!rt)
> return -ENOMEM;
> - memset((char *)rt, 0, sizeof(struct irq_routing_table));
>
> /* Populate the PIRQ table fields */
> rt->signature = PIRQ_SIGNATURE;
> @@ -181,7 +176,8 @@ static int create_pirq_routing_table(void)
> slot_base = rt->slots;
>
> /* Now fill in the irq_info entries in the PIRQ table */
> - for (i = 0; i < count; i++) {
> + for (i = 0; i < count;
> + i++, cell += sizeof(struct pirq_routing) / sizeof(u32)) {
> struct pirq_routing pr;
>
> pr.bdf = fdt_addr_to_cpu(cell[0]);
> @@ -212,25 +208,15 @@ static int create_pirq_routing_table(void)
> if (slot->irq[pr.pin - 1].link !=
> LINK_N2V(pr.pirq, irq_router.link_base))
> debug("WARNING: Inconsistent PIRQ routing information\n");
> -
> - cell += sizeof(struct pirq_routing) /
> - sizeof(u32);
> - continue;
> - } else {
> - debug("writing INT%c\n", 'A' + pr.pin - 1);
> - fill_irq_info(slot, PCI_BUS(pr.bdf),
> - PCI_DEV(pr.bdf), pr.pin, pr.pirq);
> - cell += sizeof(struct pirq_routing) /
> - sizeof(u32);
> continue;
This else case should not be removed. In this case, irq_entries should
not be increased.
> }
> + } else {
> + slot = slot_base + irq_entries;
> }
> -
> - slot = slot_base + irq_entries;
> - fill_irq_info(slot, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
> - pr.pin, pr.pirq);
> + debug("writing INT%c\n", 'A' + pr.pin - 1);
> + fill_irq_info(slot, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), pr.pin,
> + pr.pirq);
> irq_entries++;
> - cell += sizeof(struct pirq_routing) / sizeof(u32);
> }
>
> rt->size = irq_entries * sizeof(struct irq_info) + 32;
> --
Regards,
Bin
More information about the U-Boot
mailing list