[U-Boot] [PATCH 1/2] ARM: tegra: Add e2220-1170 board
Simon Glass
sjg at chromium.org
Thu Jul 30 01:02:03 CEST 2015
Hi Stephen,
On 29 July 2015 at 13:48, Stephen Warren <swarren at wwwdotorg.org> wrote:
>
Commit message?
> From: Stephen Warren <swarren at nvidia.com>
>
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/tegra210-e2220-1170.dts | 58 +++++
> arch/arm/mach-tegra/tegra210/Kconfig | 6 +
> board/nvidia/e2220-1170/Kconfig | 12 +
> board/nvidia/e2220-1170/MAINTAINERS | 6 +
> board/nvidia/e2220-1170/Makefile | 8 +
> board/nvidia/e2220-1170/e2220-1170.c | 48 ++++
> board/nvidia/e2220-1170/pinmux-config-e2220-1170.h | 269 +++++++++++++++++++++
> configs/e2220-1170_defconfig | 16 ++
> include/configs/e2220-1170.h | 72 ++++++
> 10 files changed, 496 insertions(+)
> create mode 100644 arch/arm/dts/tegra210-e2220-1170.dts
> create mode 100644 board/nvidia/e2220-1170/Kconfig
> create mode 100644 board/nvidia/e2220-1170/MAINTAINERS
> create mode 100644 board/nvidia/e2220-1170/Makefile
> create mode 100644 board/nvidia/e2220-1170/e2220-1170.c
> create mode 100644 board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
> create mode 100644 configs/e2220-1170_defconfig
> create mode 100644 include/configs/e2220-1170.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ba6355379cba..d8e1841eb4d8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -33,6 +33,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
> tegra124-jetson-tk1.dtb \
> tegra124-nyan-big.dtb \
> tegra124-venice2.dtb \
> + tegra210-e2220-1170.dtb \
> tegra210-p2571.dtb
> dtb-$(CONFIG_ARCH_UNIPHIER) += \
> uniphier-ph1-sld3-ref.dtb \
> diff --git a/arch/arm/dts/tegra210-e2220-1170.dts b/arch/arm/dts/tegra210-e2220-1170.dts
> new file mode 100644
> index 000000000000..75efbba1061e
> --- /dev/null
> +++ b/arch/arm/dts/tegra210-e2220-1170.dts
> @@ -0,0 +1,58 @@
> +/dts-v1/;
> +
> +#include "tegra210.dtsi"
> +
> +/ {
> + model = "NVIDIA E2220-1170";
> + compatible = "nvidia,e2220-1170", "nvidia,tegra210";
> +
> + chosen {
> + stdout-path = &uarta;
> + };
> +
> + aliases {
> + i2c0 = "/i2c at 0,7000d000";
> + sdhci0 = "/sdhci at 0,700b0600";
> + sdhci1 = "/sdhci at 0,700b0000";
> + usb0 = "/usb at 0,7d000000";
> + };
> +
> + memory {
> + reg = <0x0 0x80000000 0x0 0xc0000000>;
> + };
> +
> + sdhci at 0,700b0000 {
> + status = "okay";
> + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
> + power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
> + bus-width = <4>;
> + };
> +
> + sdhci at 0,700b0600 {
> + status = "okay";
> + bus-width = <8>;
> + };
> +
> + i2c at 0,7000d000 {
> + status = "okay";
> + clock-frequency = <400000>;
> + };
> +
> + usb at 0,7d000000 {
> + status = "okay";
> + dr_mode = "peripheral";
> + };
> +
> + clocks {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + clk32k_in: clock at 0 {
> + compatible = "fixed-clock";
> + reg = <0>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig
> index 147e6a83d722..9633ba8c629e 100644
> --- a/arch/arm/mach-tegra/tegra210/Kconfig
> +++ b/arch/arm/mach-tegra/tegra210/Kconfig
> @@ -3,6 +3,11 @@ if TEGRA210
> choice
> prompt "Tegra210 board select"
>
> +config TARGET_E2220_1170
> + bool "NVIDIA Tegra210 E2220-1170 base board"
> + help
> + E2220-1170 ERS
Er, description?
> +
> config TARGET_P2571
> bool "NVIDIA Tegra210 P2571 base board"
> help
> @@ -13,6 +18,7 @@ endchoice
> config SYS_SOC
> default "tegra210"
>
> +source "board/nvidia/e2220-1170/Kconfig"
> source "board/nvidia/p2571/Kconfig"
>
> endif
> diff --git a/board/nvidia/e2220-1170/Kconfig b/board/nvidia/e2220-1170/Kconfig
> new file mode 100644
> index 000000000000..0a30f4936223
> --- /dev/null
> +++ b/board/nvidia/e2220-1170/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_E2220_1170
> +
> +config SYS_BOARD
> + default "e2220-1170"
> +
> +config SYS_VENDOR
> + default "nvidia"
> +
> +config SYS_CONFIG_NAME
> + default "e2220-1170"
> +
> +endif
> diff --git a/board/nvidia/e2220-1170/MAINTAINERS b/board/nvidia/e2220-1170/MAINTAINERS
> new file mode 100644
> index 000000000000..0abb37884018
> --- /dev/null
> +++ b/board/nvidia/e2220-1170/MAINTAINERS
> @@ -0,0 +1,6 @@
> +E2220-1170 BOARD
> +M: Tom Warren <twarren at nvidia.com>
> +S: Maintained
> +F: board/nvidia/e2220-1170/
> +F: include/configs/e2220-1170.h
> +F: configs/e2220-1170_defconfig
> diff --git a/board/nvidia/e2220-1170/Makefile b/board/nvidia/e2220-1170/Makefile
> new file mode 100644
> index 000000000000..c956b1972deb
> --- /dev/null
> +++ b/board/nvidia/e2220-1170/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2013-2015
> +# NVIDIA Corporation <www.nvidia.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += e2220-1170.o
> diff --git a/board/nvidia/e2220-1170/e2220-1170.c b/board/nvidia/e2220-1170/e2220-1170.c
> new file mode 100644
> index 000000000000..b6976a227880
> --- /dev/null
> +++ b/board/nvidia/e2220-1170/e2220-1170.c
> @@ -0,0 +1,48 @@
> +/*
> + * (C) Copyright 2013-2015
> + * NVIDIA Corporation <www.nvidia.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <i2c.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/pinmux.h>
> +#include "pinmux-config-e2220-1170.h"
> +
> +void pin_mux_mmc(void)
> +{
> + struct udevice *dev;
> + uchar val;
> + int ret;
> +
> + /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
> + ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
> + if (ret) {
> + printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
> + return;
> + }
> + val = 0xf2;
> + ret = dm_i2c_write(dev, 0x27, &val, 1);
> + if (ret)
> + printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
Shouldn't this be in a PMIC driver?
> +}
> +
> +/*
> + * Routine: pinmux_init
> + * Description: Do individual peripheral pinmux configs
> + */
> +void pinmux_init(void)
> +{
> + pinmux_clear_tristate_input_clamping();
> +
> + gpio_config_table(e2220_1170_gpio_inits,
> + ARRAY_SIZE(e2220_1170_gpio_inits));
> +
> + pinmux_config_pingrp_table(e2220_1170_pingrps,
> + ARRAY_SIZE(e2220_1170_pingrps));
> +
> + pinmux_config_drvgrp_table(e2220_1170_drvgrps,
> + ARRAY_SIZE(e2220_1170_drvgrps));
> +}
> diff --git a/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h b/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
> new file mode 100644
> index 000000000000..397dc7f44b11
> --- /dev/null
> +++ b/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
> @@ -0,0 +1,269 @@
> +/*
> + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _PINMUX_CONFIG_E2220_1170_H_
> +#define _PINMUX_CONFIG_E2220_1170_H_
> +
> +#define GPIO_INIT(_gpio, _init) \
> + { \
> + .gpio = GPIO_P##_gpio, \
> + .init = TEGRA_GPIO_INIT_##_init, \
> + }
> +
> +static const struct tegra_gpio_config e2220_1170_gpio_inits[] = {
> + /* gpio, init_val */
> + GPIO_INIT(A5, IN),
> + GPIO_INIT(A6, IN),
> + GPIO_INIT(B4, IN),
> + GPIO_INIT(E6, IN),
> + GPIO_INIT(G2, OUT0),
> + GPIO_INIT(G3, OUT0),
> + GPIO_INIT(H0, OUT0),
> + GPIO_INIT(H1, OUT0),
> + GPIO_INIT(H2, IN),
> + GPIO_INIT(H3, OUT0),
> + GPIO_INIT(H4, OUT0),
> + GPIO_INIT(H5, IN),
> + GPIO_INIT(H6, OUT0),
> + GPIO_INIT(H7, OUT0),
> + GPIO_INIT(I0, OUT0),
> + GPIO_INIT(I1, IN),
> + GPIO_INIT(I2, OUT0),
> + GPIO_INIT(I3, OUT0),
> + GPIO_INIT(K0, IN),
> + GPIO_INIT(K1, OUT0),
> + GPIO_INIT(K2, OUT0),
> + GPIO_INIT(K3, OUT0),
> + GPIO_INIT(K4, IN),
> + GPIO_INIT(K5, OUT0),
> + GPIO_INIT(K6, IN),
> + GPIO_INIT(K7, OUT0),
> + GPIO_INIT(L0, OUT0),
> + GPIO_INIT(S4, OUT0),
> + GPIO_INIT(S5, OUT0),
> + GPIO_INIT(S6, OUT0),
> + GPIO_INIT(S7, OUT0),
> + GPIO_INIT(T0, OUT0),
> + GPIO_INIT(T1, OUT0),
> + GPIO_INIT(V1, OUT0),
> + GPIO_INIT(V2, OUT0),
> + GPIO_INIT(V3, IN),
> + GPIO_INIT(V5, OUT0),
> + GPIO_INIT(V6, OUT0),
> + GPIO_INIT(X0, IN),
> + GPIO_INIT(X1, IN),
> + GPIO_INIT(X2, IN),
> + GPIO_INIT(X3, IN),
> + GPIO_INIT(X4, IN),
> + GPIO_INIT(X5, IN),
> + GPIO_INIT(X6, IN),
> + GPIO_INIT(X7, IN),
> + GPIO_INIT(Y0, IN),
> + GPIO_INIT(Y1, IN),
> + GPIO_INIT(Z0, IN),
> + GPIO_INIT(Z4, OUT0),
> + GPIO_INIT(BB2, OUT0),
> + GPIO_INIT(BB3, OUT0),
> + GPIO_INIT(BB4, IN),
> + GPIO_INIT(CC1, IN),
> + GPIO_INIT(CC5, OUT0),
> + GPIO_INIT(CC6, IN),
> + GPIO_INIT(CC7, OUT0),
> +};
> +
> +#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv) \
> + { \
> + .pingrp = PMUX_PINGRP_##_pingrp, \
> + .func = PMUX_FUNC_##_mux, \
> + .pull = PMUX_PULL_##_pull, \
> + .tristate = PMUX_TRI_##_tri, \
> + .io = PMUX_PIN_##_io, \
> + .od = PMUX_PIN_OD_##_od, \
> + .e_io_hv = PMUX_PIN_E_IO_HV_##_e_io_hv, \
> + .lock = PMUX_PIN_LOCK_DEFAULT, \
> + }
> +
> +static const struct pmux_pingrp_config e2220_1170_pingrps[] = {
Is this U-Boot code or is it auto-generated? If the latter, can you
please add instructions here?
> + /* pingrp, mux, pull, tri, e_input, od, e_io_hv */
> + PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, NORMAL),
> + PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, UP, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(PEX_WAKE_N_PA2, PE, UP, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(PEX_L1_RST_N_PA3, PE1, NORMAL, NORMAL, OUTPUT, DISABLE, NORMAL),
> + PINCFG(PEX_L1_CLKREQ_N_PA4, PE1, UP, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PA6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP1_FS_PB0, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP1_DIN_PB1, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP1_DOUT_PB2, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP1_SCLK_PB3, I2S1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SPI2_MOSI_PB4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SPI2_MISO_PB5, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI2_SCK_PB6, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI2_CS0_PB7, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI1_MOSI_PC0, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI1_MISO_PC1, SPI1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SPI1_SCK_PC2, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI1_CS0_PC3, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI1_CS1_PC4, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI4_SCK_PC5, SPI4, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI4_CS0_PC6, SPI4, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI4_MOSI_PC7, SPI4, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPI4_MISO_PD0, SPI4, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(UART3_TX_PD1, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART3_RX_PD2, UARTC, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(UART3_RTS_PD3, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART3_CTS_PD4, UARTC, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC1_CLK_PE0, DMIC1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC1_DAT_PE1, DMIC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC2_CLK_PE2, DMIC2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC2_DAT_PE3, DMIC2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC3_CLK_PE4, DMIC3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(DMIC3_DAT_PE5, DMIC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PE6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(UART2_TX_PG0, UART, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART2_RX_PG1, UART, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(UART2_RTS_PG2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART2_CTS_PG3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(WIFI_EN_PH0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(WIFI_RST_PH1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(WIFI_WAKE_AP_PH2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(AP_WAKE_BT_PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PH6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(AP_WAKE_NFC_PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(NFC_INT_PI1, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(GPS_EN_PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(GPS_RST_PI3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART4_TX_PI4, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART4_RX_PI5, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(UART4_RTS_PI6, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART4_CTS_PI7, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(GEN1_I2C_SDA_PJ0, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(GEN1_I2C_SCL_PJ1, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(GEN2_I2C_SCL_PJ2, I2C2, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(GEN2_I2C_SDA_PJ3, I2C2, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(DAP4_FS_PJ4, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP4_DIN_PJ5, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP4_DOUT_PJ6, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP4_SCLK_PJ7, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PK0, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PK2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PK3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PK4, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PK6, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PK7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PL0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PL1, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_CLK_PM0, SDMMC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_CMD_PM1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_DAT3_PM2, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_DAT2_PM3, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_DAT1_PM4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC1_DAT0_PM5, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_CLK_PP0, SDMMC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_CMD_PP1, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_DAT3_PP2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_DAT2_PP3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_DAT1_PP4, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(SDMMC3_DAT0_PP5, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(CAM1_MCLK_PS0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM2_MCLK_PS1, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM_I2C_SCL_PS2, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(CAM_I2C_SDA_PS3, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(CAM_RST_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM_AF_EN_PS5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM_FLASH_EN_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM1_PWDN_PS7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM2_PWDN_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CAM1_STROBE_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(UART1_RTS_PU2, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(UART1_CTS_PU3, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_RST_PV2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_GPIO1_PV3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_GPIO2_PV4, PWM1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(AP_READY_PV5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(TOUCH_CLK_PV7, TOUCH, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(TOUCH_INT_PX1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(MOTION_INT_PX2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(ALS_PROX_INT_PX3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(BUTTON_POWER_ON_PX5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(BUTTON_VOL_DOWN_PX7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(BUTTON_SLIDE_SW_PY0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(BUTTON_HOME_PY1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(LCD_TE_PY2, DISPLAYA, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PWR_I2C_SCL_PY3, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(PWR_I2C_SDA_PY4, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(CLK_32K_OUT_PY5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PZ0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PZ1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PZ2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PZ3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PZ4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PZ5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP2_FS_PAA0, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(AUD_MCLK_PBB0, AUD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(GPIO_X3_AUD_PBB4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
> + PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL),
> + PINCFG(SPDIF_OUT_PCC2, SPDIF, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SPDIF_IN_PCC3, SPDIF, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(USB_VBUS_EN0_PCC4, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
> + PINCFG(USB_VBUS_EN1_PCC5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, NORMAL),
> + PINCFG(DP_HPD0_PCC6, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(PCC7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, NORMAL),
> + PINCFG(SPI2_CS1_PDD0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_SCK_PEE0, QSPI, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_CS_N_PEE1, QSPI, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_IO0_PEE2, QSPI, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_IO1_PEE3, QSPI, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_IO2_PEE4, QSPI, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(QSPI_IO3_PEE5, QSPI, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(CORE_PWR_REQ, CORE, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
> + PINCFG(JTAG_RTCK, JTAG, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(CLK_REQ, SYS, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> + PINCFG(SHUTDOWN, SHUTDOWN, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
> +};
> +
> +#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
> + { \
> + .drvgrp = PMUX_DRVGRP_##_drvgrp, \
> + .slwf = _slwf, \
> + .slwr = _slwr, \
> + .drvup = _drvup, \
> + .drvdn = _drvdn, \
> + .lpmd = PMUX_LPMD_##_lpmd, \
> + .schmt = PMUX_SCHMT_##_schmt, \
> + .hsm = PMUX_HSM_##_hsm, \
> + }
> +
> +static const struct pmux_drvgrp_config e2220_1170_drvgrps[] = {
> +};
> +
> +#endif /* PINMUX_CONFIG_E2220_1170_H */
> diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig
> new file mode 100644
> index 000000000000..a31f5fa78a05
> --- /dev/null
> +++ b/configs/e2220-1170_defconfig
> @@ -0,0 +1,16 @@
> +CONFIG_ARM=y
> +CONFIG_TEGRA=y
> +CONFIG_TEGRA210=y
> +CONFIG_TARGET_E2220_1170=y
> +CONFIG_DEFAULT_DEVICE_TREE="tegra210-e2220-1170"
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_CMD_NFS is not set
> +CONFIG_SPL_DM=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USE_PRIVATE_LIBGCC=y
> diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h
> new file mode 100644
> index 000000000000..49eb55ae4b29
> --- /dev/null
> +++ b/include/configs/e2220-1170.h
> @@ -0,0 +1,72 @@
> +/*
> + * (C) Copyright 2013-2015
> + * NVIDIA Corporation <www.nvidia.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _E2220_1170_H
> +#define _E2220_1170_H
> +
> +#include <linux/sizes.h>
> +
> +/* enable PMIC */
> +#define CONFIG_MAX77620_POWER
> +
> +#include "tegra210-common.h"
> +
> +/* High-level configuration options */
> +#define V_PROMPT "Tegra210 (E2220-1170) # "
> +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA E2220-1170"
> +
> +/* Board-specific serial config */
> +#define CONFIG_SERIAL_MULTI
> +#define CONFIG_TEGRA_ENABLE_UARTA
> +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
Do we need this still?
> +
> +/* I2C */
> +#define CONFIG_SYS_I2C_TEGRA
> +#define CONFIG_CMD_I2C
> +
> +/* SD/MMC */
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_TEGRA_MMC
> +#define CONFIG_CMD_MMC
> +
> +/* Environment in eMMC, at the end of 2nd "boot sector" */
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_SYS_MMC_ENV_PART 2
> +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
> +
> +/* SPI */
> +#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */
I think this is in Kconfig now.
> +#define CONFIG_TEGRA114_SPI_CTRLS 6
And this probably should be. What does it mean? I don't see it used anywhere.
> +#define CONFIG_SPI_FLASH_WINBOND
> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
> +#define CONFIG_SF_DEFAULT_SPEED 24000000
> +#define CONFIG_CMD_SPI
> +#define CONFIG_CMD_SF
> +#define CONFIG_SPI_FLASH_SIZE (4 << 20)
> +
> +/* USB2.0 Host support */
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_TEGRA
Kconfig I think.
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_CMD_USB
> +
> +/* USB networking support */
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +
> +/* General networking support */
> +#define CONFIG_CMD_DHCP
> +
> +#include "tegra-common-usb-gadget.h"
> +#include "tegra-common-post.h"
> +
> +#define COUNTER_FREQUENCY 38400000
> +
> +#endif /* _E2220_1170_H */
> --
> 1.9.1
>
Regards,
Simon
More information about the U-Boot
mailing list