[U-Boot] [PATCH v2 4/4] usb: lpc32xx: add host USB driver

[Marek Vasut]

On Thursday, July 30, 2015 at 04:13:14 PM, LEMIEUX, SYLVAIN wrote:
> Hi Marek,

Hi!

> Thanks for the feedback. I will do the change and submit a new revision of
> the patch.
> 
> For your question regarding reference to UART 5 inside the USB driver;
> * It is possible to also  route the UART5 Tx/Rx pin to the USB D+ and D-
> pins; the driver ensure this is not selected.
>    For details, refer to UM10326, "LPC32x0 and LPC32x0/01 User manual -
> Rev. 3" table 459 and paragraph 17.2.3.2.6.
> * I will add comments in the code.

Well in that case, you should pull out a separate pinmux code and do the
pinmuxing in the board setup code, definitelly not in the USB driver.

Best regards,
Marek Vasut