[U-Boot] [PATCH][v7] mpc85xx/T104xD4RDB: Add T104xD4RDB boards support

[York Sun]

On 06/05/2015 02:59 AM, Priyanka Jain wrote:
> T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
>     T1040D4RDB is re-designed T1040RDB board with following changes :
>     - Support of DDR4 memory
>     - Support of 0x66 serdes protocol which can support following interfaces
>         - 2 RGMII's on DTSEC4, DTSEC5
>         - 1 SGMII on DTSEC3
>     - Support of QE-TDM
> 
>     Similarily T1042D4RDB is a Freescale reference board that hosts the T1040
>     SoC. T1042D4RDB is re-designed T1042RDB board with following changes :
>     - Support of DDR4 memory
>     - Support for 0x86 serdes protocol which can support following interfaces
>         - 2 RGMII's on DTSEC4, DTSEC5
>         - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
>     - Support of DIU
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
> Signed-off-by: Wang Dongsheng <dongsheng.wang at freescale.com>
> ---
> changes from v2:
>  - adds SGMII suport using CPLD
>  - removes extra endif
> changes from v3:
>  - removes checkpatch error
> changes from v4:
>  - wrong use of defined MACRO in eth.c file, adds macro properly
> changes from v5:
>  - updates README files, t1040d4_rcw.cfg and t1042d4_rcw.cfg 
>  - update DDR settings
> changes from v6:
>  - update DDR settings, config files, cpld code, README
>  - Add QGMII phy addr configs, update DIU_SEL value

Applied to u-boot-mpc85xx master after adding CONFIG_SPI_FLASH to defconfig, the
same as your v8 patch.

Thanks.

York