[U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support

[Bhuvanchandra DV]

On 06/01/2015 04:05 PM, Stefan Agner wrote:
> On 2015-06-01 10:51, Bhuvanchandra DV wrote:
>> Most of the drivers available for Vybrid are not yet converted
>> to OF model to use device tree model, only few drivers
>> like SPI and GPIO drivers use device trees.
>> Add separate defconfig for who needs to use device tree model.
>> Later this can be integrated to single defconfig.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
>> ---
>>   configs/colibri_vf_dtb_defconfig | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>   create mode 100644 configs/colibri_vf_dtb_defconfig
>>
>> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
>> new file mode 100644
>> index 0000000..d4c8c58
>> --- /dev/null
>> +++ b/configs/colibri_vf_dtb_defconfig
>> @@ -0,0 +1,8 @@
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_COLIBRI_VF=y
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
>> +CONFIG_NAND_VF610_NFC=y
>> +CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
>> +CONFIG_DM=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
>
> One minor nit: Can you add this new file to the list of files in our
> boards maintainer file?
>
> board/toradex/colibri_vf/MAINTAINERS
Sure, will add it.
>
> But otherwise:
> Acked-by: Stefan Agner <stefan at agner.ch>
>
> --
> Stefan
>
Best regards,
Bhuvan