[U-Boot] [PATCH V3 06/11] arm: vf610: Add iomux support for DSPI

[Bhuvanchandra DV]

Add iomux definitions for DSPI second instance.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
---
 arch/arm/include/asm/arch-vf610/iomux-vf610.h |  9 +++++++++
 board/toradex/colibri_vf/colibri_vf.c         | 21 +++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index e22e3f9..b8b22b1 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -35,6 +35,11 @@
 #define VF610_GPIO_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
 				PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
 
+#define VF610_DSPI_PAD_CTRL	(PAD_CTL_OBE_ENABLE | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DSPI_SIN_PAD_CTRL	(PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -91,6 +96,10 @@ enum {
 	VF610_PAD_PTC15__RMII1_TD1		= IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC16__RMII1_TD0		= IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTC17__RMII1_TXEN		= IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTD5__DSPI1_CS0		= IOMUX_PAD(0x0150, 0x0150, 3, 0x300, 1, VF610_DSPI_PAD_CTRL),
+	VF610_PAD_PTD6__DSPI1_SIN		= IOMUX_PAD(0x0154, 0x0154, 3, 0x2fc, 1, VF610_DSPI_SIN_PAD_CTRL),
+	VF610_PAD_PTD7__DSPI1_SOUT		= IOMUX_PAD(0x0158, 0x0158, 3, __NA_, 0, VF610_DSPI_PAD_CTRL),
+	VF610_PAD_PTD8__DSPI1_SCK		= IOMUX_PAD(0x015c, 0x015c, 3, 0x2f8, 1, VF610_DSPI_PAD_CTRL),
 	VF610_PAD_PTC29__GPIO_102		= IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
 	VF610_PAD_PTC30__GPIO_103		= IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
 	VF610_PAD_PTA24__ESDHC1_CLK		= IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index e354c6d..7173022 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -146,6 +146,20 @@ static void setup_iomux_nfc(void)
 }
 #endif
 
+#ifdef CONFIG_FSL_DSPI
+static void setup_iomux_dspi(void)
+{
+	static const iomux_v3_cfg_t dspi1_pads[] = {
+		VF610_PAD_PTD5__DSPI1_CS0,
+		VF610_PAD_PTD6__DSPI1_SIN,
+		VF610_PAD_PTD7__DSPI1_SOUT,
+		VF610_PAD_PTD8__DSPI1_SCK,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
+}
+#endif
+
 #ifdef CONFIG_VYBRID_GPIO
 static void setup_iomux_gpio(void)
 {
@@ -252,6 +266,9 @@ static void clock_init(void)
 
 	clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
 			CCM_CCGR0_UART0_CTRL_MASK);
+#ifdef CONFIG_FSL_DSPI
+	setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK);
+#endif
 	clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
 			CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
@@ -364,6 +381,10 @@ int board_early_init_f(void)
 	setup_iomux_gpio();
 #endif
 
+#ifdef CONFIG_FSL_DSPI
+	setup_iomux_dspi();
+#endif
+
 	return 0;
 }
 
-- 
2.1.0