[U-Boot] Building u-boot.rom for Minnowboard

[Saket Sinha]

Hi Simon,

>>
>> >> >> 5. Now when I am powering Minnowmax and collecting the output on serial
>> >> >> Nothing appears.
>> >> >>
>
> It seems to boot OK for me. See details and download link below:
> Download u-boot.rom from:
> https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharing
>

With this image also, I do not get any output on my serial port(though
two blue leds D1 & D2 are lighted up) which I run by "screen
/dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John.

 When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the
u-boot.rom, I get all the UEFI outputs on the same setup.


>> >>
>> >> Can you confirm that you have setup the flashrom tool correctly?
>>
>> As of now I am trying to burn u-boot.rom with SPI programmer/software
>> on Windows to check the sanity of my flashrom setup.
>>

I have tried flashing both the u-boot.rom and
MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software
on Windows with exactly same results for both the cases as with
flashrom so atleast flashrom setup is correct.


Regards,
Saket Sinha