[U-Boot] Building u-boot.rom for Minnowboard

[Simon Glass]

Hi John,

On Jun 1, 2015 3:21 PM, "John Hawley" <john.hawley at intel.com> wrote:
>
> Shouldn't be an appreciable differences in the boards, how are you
> flashing it?  Can you punt me a copy of the image so I can try it here
> and double check?
>
> - John

Please see below for the drive link.

- Simon

>
> On 06/01/2015 01:10 PM, Simon Glass wrote:
> > +John
> >
> > Hi Saket,
> >
> > On 1 June 2015 at 13:45, Saket Sinha <saket.sinha89 at gmail.com> wrote:
> >> Hi Simon,
> >>
> >>>>
> >>>>>>>> 5. Now when I am powering Minnowmax and collecting the output on
serial
> >>>>>>>> Nothing appears.
> >>>>>>>>
> >>>
> >>> It seems to boot OK for me. See details and download link below:
> >>> Download u-boot.rom from:
> >>>
https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharing
> >>>
> >>
> >> With this image also, I do not get any output on my serial port(though
> >> two blue leds D1 & D2 are lighted up) which I run by "screen
> >> /dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John.
> >>
> >>  When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the
> >> u-boot.rom, I get all the UEFI outputs on the same setup.
> >>
> >>
> >>>>>>
> >>>>>> Can you confirm that you have setup the flashrom tool correctly?
> >>>>
> >>>> As of now I am trying to burn u-boot.rom with SPI programmer/software
> >>>> on Windows to check the sanity of my flashrom setup.
> >>>>
> >>
> >> I have tried flashing both the u-boot.rom and
> >> MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software
> >> on Windows with exactly same results for both the cases as with
> >> flashrom so atleast flashrom setup is correct.
> >
> > Yes. I'm not sure what to do here sorry. That image works for me. Is
> > it possible that you have a different board variant to me? Is it the
> > dual core one?
> >
> > Regards,
> > Simon
> >