[U-Boot] [PATCH v1 03/12] arm: mvebu: Use default reg base address for SPL on A38x

[Stefan Roese]

On A38x switching the regs base address without running from
SDRAM doesn't seem to work. So let the SPL still use the
default base address and switch to the new address in the
mail u-boot later.

Signed-off-by: Stefan Roese <sr at denx.de>
---

 arch/arm/mach-mvebu/include/mach/soc.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 0a9307c..d07e462 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -28,7 +28,17 @@
 /* SOC specific definations */
 #define INTREG_BASE		0xd0000000
 #define INTREG_BASE_ADDR_REG	(INTREG_BASE + 0x20080)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYS_MVEBU_DDR_A38X)
+/*
+ * On A38x switching the regs base address without running from
+ * SDRAM doesn't seem to work. So let the SPL still use the
+ * default base address and switch to the new address in the
+ * main u-boot later.
+ */
+#define SOC_REGS_PHY_BASE	0xd0000000
+#else
 #define SOC_REGS_PHY_BASE	0xf1000000
+#endif
 #define MVEBU_REGISTER(x)	(SOC_REGS_PHY_BASE + x)
 
 #define MVEBU_SDRAM_SCRATCH	(MVEBU_REGISTER(0x01504))
-- 
2.4.2