[U-Boot] [PATCH v1 05/12] arm: mvebu: Disable MMU before changing register base address

[Stefan Roese]

Only with disabled MMU its possible to switch the base register address on
Armada 38x. Without this the SDRAM located at >= 0x4000.0000 is also not
accessible, as its still locked to cache.

Signed-off-by: Stefan Roese <sr at denx.de>
---

 arch/arm/mach-mvebu/cpu.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 04681fc..b687422 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -159,9 +159,27 @@ static void update_sdram_window_sizes(void)
 	}
 }
 
+void mmu_disable(void)
+{
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 0\n"
+		"bic r0, #1\n"
+		"mcr p15, 0, r0, c1, c0, 0\n");
+}
+
 #ifdef CONFIG_ARCH_CPU_INIT
 int arch_cpu_init(void)
 {
+#ifndef CONFIG_SPL_BUILD
+	/*
+	 * Only with disabled MMU its possible to switch the base
+	 * register address on Armada 38x. Without this the SDRAM
+	 * located at >= 0x4000.0000 is also not accessible, as its
+	 * still locked to cache.
+	 */
+	mmu_disable();
+#endif
+
 	/* Linux expects the internal registers to be at 0xf1000000 */
 	writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG);
 
-- 
2.4.2