[U-Boot] [PATCH 01/10] ARM: DRA7: Make do_set_mux32() generic
Lokesh Vutla
lokeshvutla at ti.com
Thu Jun 4 13:12:33 CEST 2015
do_set_mux32() is redefined in dra7xx and beagle_x15 boards.
IO delay recalibration sequence also needs this.
Making it generic to avoid duplication.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/cpu/armv7/omap5/hwinit.c | 9 +++++++++
arch/arm/include/asm/arch-omap5/sys_proto.h | 1 +
board/ti/beagle_x15/board.c | 10 ----------
board/ti/dra7xx/evm.c | 10 ----------
4 files changed, 10 insertions(+), 20 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 8d6b59e..786d6d0 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -40,6 +40,15 @@ static struct gpio_bank gpio_bank_54xx[8] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+ for (i = 0; i < size; i++, pad++)
+ writel(pad->val, base + pad->offset);
+}
+
#ifdef CONFIG_SPL_BUILD
/* LPDDR2 specific IO settings */
static void io_settings_lpddr2(void)
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index ea84665..b41bf15 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -32,6 +32,7 @@ void gpmc_init(void);
void watchdog_init(void);
u32 get_device_type(void);
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size);
void set_muxconf_regs_essential(void);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
index ffcd531..39e1527 100644
--- a/board/ti/beagle_x15/board.c
+++ b/board/ti/beagle_x15/board.c
@@ -240,16 +240,6 @@ int board_late_init(void)
return 0;
}
-static void do_set_mux32(u32 base,
- struct pad_conf_entry const *array, int size)
-{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
-
- for (i = 0; i < size; i++, pad++)
- writel(pad->val, base + pad->offset);
-}
-
void set_muxconf_regs_essential(void)
{
do_set_mux32((*ctrl)->control_padconf_core_base,
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index d464855..1b05150 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -107,16 +107,6 @@ int board_late_init(void)
return 0;
}
-static void do_set_mux32(u32 base,
- struct pad_conf_entry const *array, int size)
-{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
-
- for (i = 0; i < size; i++, pad++)
- writel(pad->val, base + pad->offset);
-}
-
void set_muxconf_regs_essential(void)
{
do_set_mux32((*ctrl)->control_padconf_core_base,
--
1.9.1
More information about the U-Boot
mailing list