[U-Boot] Building u-boot.rom for Minnowboard

[Saket Sinha]

Hi Bin,

>
> I've created two patches to include a D0 stepping microcode for
> BayTrail-I. The microcode was generated from the microcode header in
> the coreboot source tree.
>
> The first patch is waiting for the list moderator's approval as it
> exceeds the mailing list size. The second patch is at
> http://patchwork.ozlabs.org/patch/480673/
> I will send the first patch to you offline. Please have a try.

After applying both the patches, I am able to get the u-boot prompt
with u-boot.rom .

Please find the logs below -

U-Boot 2015.07-rc1-20956-g5d3c2c5-dirty (Jun 04 2015 - 19:27:32 +0530)

CPU: x86_64, vendor Intel, device 30679h
DRAM:  2 GiB
MMC:   ValleyView SDHCI: 0, ValleyView SDHCI: 1
Using default environment

Video: 1280x1024x16
Model: Intel Minnowboard Max
SCSI:  SATA link 0 timeout.
SATA link 1 timeout.
AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: 64bit ncq stag pm led clo pio slum part sxs
scanning bus for devices...
Found 0 device(s).
Net:   RTL8169#0
Warning: RTL8169#0 using MAC address from net device

=>


Thanks for these wonderful patches.

Regards,
Saket Sinha