[U-Boot] [PATCH] Bananapi: Fix ethernet device initialization

[Paul Kocialkowski]

Hi,

> Ethernet device initialization fails with the following message:
> Net:   PH: dir_output: error: gpio PH23 not reserved
> Phy 1 not found
> PHY reset timed out
> eth0: ethernet at 01c50000
> 
> Tested on Banana Pi board.
> 
> Signed-off-by: Maxin B. John <maxin.john at enea.com>
> ---
>  arch/arm/cpu/armv7/sunxi/board.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index a82c8b9..030a711 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -223,6 +223,7 @@ int cpu_eth_init(bd_t *bis)
>  	__maybe_unused int rc;
>  
>  #ifdef CONFIG_MACPWR
> +	gpio_request(CONFIG_MACPWR, "MAC Power");

I suggest using the string "macpwr" instead to be consistent with:
board/sunxi/ahci.c:	gpio_request(CONFIG_SATAPWR, "satapwr");

Good find otherwise!

>  	gpio_direction_output(CONFIG_MACPWR, 1);
>  	mdelay(200);
>  #endif

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150607/1198ba0c/attachment.sig>