[U-Boot] [PATCH 0/7] Odroid XU3: enable DWC3 and DFU/THOR/UMS

Lukasz Majewski l.majewski at samsung.com
Mon Jun 8 16:03:27 CEST 2015


Hi Przemyslaw,

> Hello,
> this patchset consists of all features required to use DFU on Odroid
> XU3. The default extra environment settings from exynos5-common.h is
> redefined and appended by dfu env settings.
> 
> For an example of boot.scr for this board, two script files are added,
> for booting zImage only, or any of zImage/uImage/FIT.
> 
> DFU, THOR, UMS and boot with the attached scripts were tested on
> Odroid XU3.
> 
> The patchset is rebased on master tree:
> '3238639 Tom Rini Merge git://git.denx.de/u-boot-net'
> 
> Thanks,
> Przemyslaw Marczak
> 
> Inha Song (2):
>   smdk5420: board: add functions to init dfu environment settings
>   usb: f_mass_storage: sleep_thread: decrease the interval for check
>     ctrlc()
> 
> Joonyoung Shim (1):
>   smdk5420: board: add functions required to enable USB DWC3
> 
> Przemyslaw Marczak (2):
>   odroid-xu3: config: enable DFU/THOR/UMS by add configs and
> environment samsung: common: add example boot scripts
> 
> Łukasz Majewski (2):
>   arm: exynos: USB3 PHY base definition for Exynos5 SoCs
>   samsung: usb: phy: Support for DWC3 PHY
> 
>  arch/arm/include/asm/arch-exynos/cpu.h        |  2 +-
>  board/samsung/common/board.c                  |  6 +-
>  board/samsung/common/bootscripts/autoboot.cmd | 92
> +++++++++++++++++++++++++++
> board/samsung/common/bootscripts/bootzimg.cmd | 10 +++
> board/samsung/smdk5420/smdk5420.c             | 80
> +++++++++++++++++++++-- drivers/usb/dwc3/Makefile
> |  1 + drivers/usb/dwc3/samsung_usb_phy.c            | 78
> +++++++++++++++++++++++ drivers/usb/gadget/f_mass_storage.c
> |  2 +- include/configs/odroid_xu3.h                  | 88
> ++++++++++++++++++++++++-
> include/samsung-usb-phy-uboot.h               | 16 +++++ 10 files
> changed, 363 insertions(+), 12 deletions(-) create mode 100644
> board/samsung/common/bootscripts/autoboot.cmd create mode 100644
> board/samsung/common/bootscripts/bootzimg.cmd create mode 100644
> drivers/usb/dwc3/samsung_usb_phy.c create mode 100644
> include/samsung-usb-phy-uboot.h
> 

Applied to u-boot-dfu tree.

(Automated) Tested-by: Lukasz Majewski <l.majewski at samsung.com>
Test HW: Trats (Exynos4210)

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group


More information about the U-Boot mailing list