[U-Boot] [PATCH 4/8] imx: mx6: ccm: Change the clock settings for i.MX6QP
Stefano Babic
sbabic at denx.de
Wed Jun 10 11:23:10 CEST 2015
Hi Peng,
On 10/06/2015 10:06, Peng Fan wrote:
> Since i.MX6QP changes some CCM registers, so modify the clocks settings to
> follow the hardware changes.
>
> A new CONFIG_MX6QP is introduced here and is used for the CCM difference.
> At default CONFIG_MX6Q is enabled along with the CONFIG_MX6QP.
>
> Signed-off-by: Ye.Li <B37916 at freescale.com>
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> ---
> arch/arm/cpu/armv7/mx6/clock.c | 13 +++++---
> arch/arm/cpu/armv7/mx6/soc.c | 5 ++-
> arch/arm/include/asm/arch-mx6/crm_regs.h | 55 ++++++++++++++++++++++++--------
> include/configs/mx6_common.h | 3 ++
> 4 files changed, 57 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index ae99945..36cd5a8 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -323,7 +323,7 @@ static u32 get_ipg_per_clk(void)
> u32 reg, perclk_podf;
>
> reg = __raw_readl(&imx_ccm->cscmr1);
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
> if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
> return MXC_HCLK; /* OSC 24Mhz */
I have a general issue. We already manage to have support for multiple
variants of MX6 (at least, dual/quad/solo) with a single image. We get
it dropping nasty #ifdef in case of quad/dual. I assume there are only
slight changes in layout for the 6QP. Cannot we manage these changes at
runtime instead of introducing a compiler switch ?
> #endif
> @@ -337,7 +337,7 @@ static u32 get_uart_clk(void)
> u32 reg, uart_podf;
> u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
> reg = __raw_readl(&imx_ccm->cscdr1);
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
> if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
> freq = MXC_HCLK;
> #endif
> @@ -352,8 +352,13 @@ static u32 get_cspi_clk(void)
> u32 reg, cspi_podf;
>
> reg = __raw_readl(&imx_ccm->cscdr2);
> - reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
> - cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
> + cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK)
> + >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
> +
> +#if defined(CONFIG_MX6QP)
> + if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
> + return MXC_HCLK / (cspi_podf + 1);
> +#endif
>
> return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
> }
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index e3474e7..5eea9d9 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -335,9 +335,12 @@ static void set_ahb_rate(u32 val)
> static void clear_mmdc_ch_mask(void)
> {
> struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> + u32 reg;
> + reg = readl(&mxc_ccm->ccdr);
>
> /* Clear MMDC channel mask */
> - writel(0, &mxc_ccm->ccdr);
> + reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
> + writel(reg, &mxc_ccm->ccdr);
> }
>
> static void init_bandgap(void)
> diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
> index 887d048..576dabe 100644
> --- a/arch/arm/include/asm/arch-mx6/crm_regs.h
> +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
> @@ -113,7 +113,7 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CCR_WB_COUNT_MASK 0x7
> #define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16)
> #define MXC_CCM_CCR_COSC_EN (1 << 12)
> -#ifdef CONFIG_MX6SX
> +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6QP))
> #define MXC_CCM_CCR_OSCNT_MASK 0x7F
> #else
> #define MXC_CCM_CCR_OSCNT_MASK 0xFF
> @@ -123,6 +123,9 @@ struct mxc_ccm_reg {
> /* Define the bits in register CCDR */
> #define MXC_CCM_CCDR_MMDC_CH1_HS_MASK (1 << 16)
> #define MXC_CCM_CCDR_MMDC_CH0_HS_MASK (1 << 17)
> +#ifdef CONFIG_MX6QP
> +#define MXC_CCM_CCDR_MMDC_CH1_AXI_ROOT_CG (1 << 18)
> +#endif
>
> /* Define the bits in register CSR */
> #define MXC_CCM_CSR_COSC_READY (1 << 5)
> @@ -196,7 +199,11 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4)
> #define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4
> #ifndef CONFIG_MX6SX
> +#ifdef CONFIG_MX6QP
> +#define MXC_CCM_CBCMR_PRE_CLK_SEL (1 << 1)
> +#else
> #define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1)
> +#endif
> #define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0)
> #endif
>
> @@ -229,7 +236,7 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7)
> #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7
> #endif
> -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
> +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
> #define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
> #define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6
> #endif
> @@ -244,15 +251,12 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19
> #define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11)
> #define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10)
> -#ifdef CONFIG_MX6SX
> +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
> #define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8)
> #define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8
> +#endif
> #define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2)
> #define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2
> -#else
> -#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2)
> -#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2
> -#endif
>
> /* Define the bits in register CSCDR1 */
> #ifndef CONFIG_MX6SX
> @@ -273,15 +277,10 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
> #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
> #endif
> -#ifdef CONFIG_MX6SL
> -#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
> -#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
> -#else
> -#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
> -#ifdef CONFIG_MX6SX
> +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
> #define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
> #endif
> -#endif
> +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
> #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
>
> /* Define the bits in register CS1CDR */
> @@ -316,10 +315,17 @@ struct mxc_ccm_reg {
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
> #define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) << 18)
> +
> +#ifdef CONFIG_MX6QP
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x7 << 15)
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 15
> +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x7) << 15)
> +#else
> #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
> #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
> #define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16)
> #endif
> +#endif
> #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
> #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
> #define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9)
> @@ -384,6 +390,11 @@ struct mxc_ccm_reg {
> /* Define the bits in register CSCDR2 */
> #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
> #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
> +#ifdef CONFIG_MX6QP
> +#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK (0x1 << 18)
> +#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_OFFSET 18
> +#endif
> +
> /* All IPU2_DI1 are LCDIF1 on MX6SX */
> #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
> #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
> @@ -758,6 +769,22 @@ struct mxc_ccm_reg {
> #else
> #define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12
> #define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
> +#ifdef CONFIG_MX6QP
> +#define MXC_CCM_CCGR6_VPUCLK_OFFSET 14
> +#define MXC_CCM_CCGR6_VPUCLK_MASK (3 << MXC_CCM_CCGR6_VPUCLK_OFFSET)
> +#define MXC_CCM_CCGR6_PRE_CLK0_OFFSET 16
> +#define MXC_CCM_CCGR6_PRE_CLK0_MASK (3 << MXC_CCM_CCGR6_PRE_CLK0_OFFSET)
> +#define MXC_CCM_CCGR6_PRE_CLK1_OFFSET 18
> +#define MXC_CCM_CCGR6_PRE_CLK1_MASK (3 << MXC_CCM_CCGR6_PRE_CLK1_OFFSET)
> +#define MXC_CCM_CCGR6_PRE_CLK2_OFFSET 20
> +#define MXC_CCM_CCGR6_PRE_CLK2_MASK (3 << MXC_CCM_CCGR6_PRE_CLK2_OFFSET)
> +#define MXC_CCM_CCGR6_PRE_CLK3_OFFSET 22
> +#define MXC_CCM_CCGR6_PRE_CLK3_MASK (3 << MXC_CCM_CCGR6_PRE_CLK3_OFFSET)
> +#define MXC_CCM_CCGR6_PRG_CLK0_OFFSET 24
> +#define MXC_CCM_CCGR6_PRG_CLK0_MASK (3 << MXC_CCM_CCGR6_PRG_CLK0_OFFSET)
> +#define MXC_CCM_CCGR6_PRG_CLK1_OFFSET 26
> +#define MXC_CCM_CCGR6_PRG_CLK1_MASK (3 << MXC_CCM_CCGR6_PRG_CLK1_OFFSET)
> +#endif
> #endif
>
> #define BM_ANADIG_PLL_SYS_LOCK 0x80000000
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index 50370e1..b5de280 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -30,6 +30,9 @@
>
> #define CONFIG_MP
> #define CONFIG_MXC_GPT_HCLK
> +#ifdef CONFIG_MX6QP
> +#define CONFIG_MX6Q
> +#endif
>
> #define CONFIG_SYS_NO_FLASH
>
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list