[U-Boot] [PATCH 6/8] imx: mx6qp: Enable PRG clock for IPU

[Peng Fan]

On Wed, Jun 10, 2015 at 11:24:04AM +0200, Stefano Babic wrote:
>On 10/06/2015 10:06, Peng Fan wrote:
>> From: "Ye.Li" <B37916 at freescale.com>
>> 
>> The i.MX6QP has a PRG module, need to enable its clock for using
>> IPU.
>> 
>> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
>> Signed-off-by: Brown Oliver <B37094 at freescale.com>
>> Signed-off-by: Ye.Li <B37916 at freescale.com>
>> ---
>>  arch/arm/cpu/armv7/mx6/clock.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>> 
>> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
>> index 36cd5a8..ae1b4cc 100644
>> --- a/arch/arm/cpu/armv7/mx6/clock.c
>> +++ b/arch/arm/cpu/armv7/mx6/clock.c
>> @@ -861,6 +861,12 @@ void enable_ipu_clock(void)
>>  	reg = readl(&mxc_ccm->CCGR3);
>>  	reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
>>  	writel(reg, &mxc_ccm->CCGR3);
>> +
>> +#ifdef CONFIG_MX6QP
>> +	reg = readl(&mxc_ccm->CCGR6);
>> +	reg |= MXC_CCM_CCGR6_PRG_CLK0_MASK;
>> +	writel(reg, &mxc_ccm->CCGR6);
>
>This is easy to replace with runtime detection.

Will fix in v2.

>
>> +#endif
>>  }
>>  #endif
>>  /***************************************************/
>> 
>
>Best regards,
>Stefano Babic
>
>-- 
>=====================================================================
>DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>=====================================================================

Regards,
Peng
--