[U-Boot] [PATCH 14/14][v2] driver/ldpaa_eth:Avoid infinite loop in QBMAN buf release

Prabhakar Kushwaha prabhakar at freescale.com
Thu Jun 11 11:03:08 CEST 2015


Change infinite loop mechanism to timer based polling.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Changes for v2: Sending as it is for patchset

 drivers/net/ldpaa_eth/ldpaa_eth.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
index 839e78a..fe8f189 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -31,6 +31,8 @@ static void ldpaa_eth_rx(struct ldpaa_eth_priv *priv,
 	uint32_t fd_length;
 	struct ldpaa_fas *fas;
 	uint32_t status, err;
+	u32 timeo = (CONFIG_SYS_HZ * 2) / 1000;
+	u32 time_start;
 	struct qbman_release_desc releasedesc;
 	struct qbman_swp *swp = dflt_dpio->sw_portal;
 
@@ -65,10 +67,15 @@ error:
 	flush_dcache_range(fd_addr, fd_addr + LDPAA_ETH_RX_BUFFER_SIZE);
 	qbman_release_desc_clear(&releasedesc);
 	qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid);
+	time_start = get_timer(0);
 	do {
 		/* Release buffer into the QBMAN */
 		err = qbman_swp_release(swp, &releasedesc, &fd_addr, 1);
-	} while (err == -EBUSY);
+	} while (get_timer(time_start) < timeo && err == -EBUSY);
+
+	if (get_timer(time_start) >= timeo)
+		printf("Rx frame: QBMAN buffer release fails\n");
+
 	return;
 }
 
@@ -195,11 +202,13 @@ static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len)
 error:
 	qbman_release_desc_clear(&releasedesc);
 	qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid);
+	time_start = get_timer(0);
 	do {
 		/* Release buffer into the QBMAN */
 		err = qbman_swp_release(swp, &releasedesc, &buffer_start, 1);
-	} while (err == -EBUSY);
+	} while (get_timer(time_start) < timeo && err == -EBUSY);
 
+	printf("TX data: QBMAN buffer release fails\n");
 	return err;
 }
 
-- 
1.9.1




More information about the U-Boot mailing list