[U-Boot] [PATCH v3 3/8] omap-common: Boot device define instead of hardcoded value

[Paul Kocialkowski]

Now that SPL boot devices are clearly defined, we can use BOOT_DEVICE_QSPI_4
instead of a hardcoded value.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index d7e2e59..38fa640 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -48,14 +48,14 @@ void save_omap_boot_params(void)
 	if (boot_device == BOOT_DEVICE_NAND_I2C)
 		boot_device = BOOT_DEVICE_NAND;
 #endif
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#ifdef BOOT_DEVICE_QSPI_4
 	/*
 	 * We get different values for QSPI_1 and QSPI_4 being used, but
 	 * don't actually care about this difference.  Rather than
 	 * mangle the later code, if we're coming in as QSPI_4 just
 	 * change to the QSPI_1 value.
 	 */
-	if (boot_device == 11)
+	if (boot_device == BOOT_DEVICE_QSPI_4)
 		boot_device = BOOT_DEVICE_SPI;
 #endif
 
-- 
1.9.1