[U-Boot] [PATCH v2 0/8] omap-common: Common boot code OMAP3 support and SYS_BOOT-based fallback boot device

[Paul Kocialkowski]

Le vendredi 12 juin 2015 à 13:56 +0200, Pali Rohár a écrit :
> On Friday 12 June 2015 13:32:56 Paul Kocialkowski wrote:
> > Le mercredi 10 juin 2015 à 13:35 +0200, Pali Rohár a écrit :
> > > On Wednesday 10 June 2015 12:58:11 Paul Kocialkowski wrote:
> > > > Le mercredi 10 juin 2015 à 12:42 +0200, Pali Rohár a écrit :
> > > > > On Wednesday 10 June 2015 12:34:39 Pali Rohár wrote:
> > > > > > On Wednesday 10 June 2015 11:54:00 Paul Kocialkowski wrote:
> > > > > > > Le mardi 09 juin 2015 à 20:34 +0200, Pali Rohár a écrit :
> > > > > > > > On Tuesday 09 June 2015 18:28:29 Pali Rohár wrote:
> > > > > > > > > On Monday 08 June 2015 23:24:18 Paul Kocialkowski wrote:
> > > > > > > > > > I would be very glad to see board maintainers give a go
> > > > > > > > > > at the changeset before it gets merged, especially on devices like
> > > > > > > > > > the Nokia RX-51 (N900) where some specific adaptation was needed.
> > > > > > > > > 
> > > > > > > > > So U-Boot is broken since e11c6c279d823dc0d2f470c5c2e3c0a9854a640f
> > > > > > > > > (see other email thread). Until somebody fix that broken commit, I
> > > > > > > > > cannot test your new patches in qemu or on (real) Nokia N900.
> > > > > > > > 
> > > > > > > > Now I tested this patch series on top of u-boot master with applied my 
> > > > > > > > patch "Nokia RX-51: Fix calculating return address in save_boot_params".
> > > > > > > >
> > > > > > > > And it really as I thought broke booting U-Boot on Nokia N900 in qemu.
> > > > > > > 
> > > > > > > I'm confused here -- did you try booting on the actual device or in
> > > > > > > qemu?
> > > > > > > 
> > > > > > 
> > > > > > I tested your changes only in qemu. But because you removed (or better
> > > > > > masked) required lowlevel asm code, it will not work on real n900 too.
> > > > > > 
> > > > > > > > So this patch series is NAK from my side.
> > > > > > > 
> > > > > > > Thanks for testing. Of course, the point is to make another version of
> > > > > > > the patch set that fits the N900 too, since we really need to integrate
> > > > > > > the omap3 to the common omap boot mechanism anyways.
> > > > > > > 
> > > > > > 
> > > > > > Make sure that asm function in rx51 lowlevel asm file is called
> > > > > > immediately from start.S. It is required. Basically no modification to
> > > > > > that function should be needed (maybe just fixing return address in lr).
> > > > 
> > > > The problem is that this declaration conflicts with the one from
> > > > omap-common's lowlevel_init.S. I understand that it is not needed for
> > > > the RX-51 since it is not loaded by the U-Boot SPL or by the bootrom.
> > > > 
> > > 
> > > Yes.
> > > 
> > > > Perhaps the best way to do things here would be to have a config option
> > > > clearly stating that it should not expect the booting device information
> > > > structure in r0. This situation is not specific to the RX-51 anyways.
> > > 
> > > Sounds good.
> > 
> > I just sent out v3 that fixes n900 support the way I suggested. I was
> > able to get my hands on the device and along with the patch you sent out
> > earlier this week, everything seems to work fine.
> > 
> 
> Hello,
> 
> have you also tested that "combined" image of u-boot and linux kernel
> (in uImage format) is working fine? That u-boot can boot that "attached"
> kernel image without problem.
> 
> Script for generating "combined" image from u-boot.bin and uImage kernel:
> https://gitorious.org/u-boot-shr/u-boot/source/maemo:debian/u-boot-gen-combined
> 
> You can boot "attached" kernel via u-boot command "run attachboot".

I haven't tried that, but since I have removed the changes I added to
the rx51-specific lowlevel_init.S, I expect that nothing should have
changed on this side.

I do not have serial on the device, so it's harder for me to figure out
whether a kernel will run fine (I would need a graphical indication on
the screen).

You're welcome to test that it still works, though.

-- 
Paul Kocialkowski, Replicant developer

Replicant is a fully free Android distribution running on several
devices, a free software mobile operating system putting the emphasis on
freedom and privacy/security.

Website: http://www.replicant.us/
Blog: http://blog.replicant.us/
Wiki/tracker/forums: http://redmine.replicant.us/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150612/e096f676/attachment.sig>