[U-Boot] [PATCH] keystone2: use correct EFUSE_BOOTROM fileds to configure speed

[Vitaly Andrianov]

The get_max_arm_speed() and get_max_dev_speed() used wrong register
fields to get the maximum speeds. This commit fixes the bug.

Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
---
 arch/arm/mach-keystone/clock.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c
index d13fbc1..625907f 100644
--- a/arch/arm/mach-keystone/clock.c
+++ b/arch/arm/mach-keystone/clock.c
@@ -246,18 +246,18 @@ static inline u32 read_efuse_bootrom(void)
 }
 #endif
 
-inline int get_max_dev_speed(void)
-{
-	return get_max_speed(read_efuse_bootrom() & 0xffff, dev_speeds);
-}
-
 #ifndef CONFIG_SOC_K2E
 inline int get_max_arm_speed(void)
 {
-	return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds);
+	return get_max_speed(read_efuse_bootrom() & 0xffff, arm_speeds);
 }
 #endif
 
+inline int get_max_dev_speed(void)
+{
+	return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, dev_speeds);
+}
+
 void pass_pll_pa_clk_enable(void)
 {
 	u32 reg;
-- 
1.9.1