[U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of 'fatload'

[Liu Jason]

> -----Original Message-----
> From: Guillaume GARDET [mailto:guillaume.gardet at free.fr]
> Sent: Tuesday, June 16, 2015 5:49 PM
> To: u-boot at lists.denx.de
> Cc: Guillaume GARDET; Liu Hui-R64343; Stefano Babic
> Subject: [U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of
> 'fatload'
> 
> This patch uses generic 'load' command instead of 'fatload' for
> 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board.
> 
> This allows to use EXT partition instead of FAT, while keeping FAT
> compatibility.
> 
> Signed-off-by: Guillaume GARDET <guillaume.gardet at free.fr>
> 
> Cc: Jason Liu <r64343 at freescale.com>
> Cc: Stefano Babic <sbabic at denx.de>

Acked-by: Jason Liu <r64343 at freescale.com>

> 
> ---
>  include/configs/mx53loco.h | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index db551a9..b3ac5e2 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -43,6 +43,7 @@
>  #define CONFIG_MMC
>  #define CONFIG_CMD_MMC
>  #define CONFIG_GENERIC_MMC
> +#define CONFIG_CMD_FS_GENERIC
>  #define CONFIG_CMD_FAT
>  #define CONFIG_CMD_EXT2
>  #define CONFIG_DOS_PARTITION
> @@ -116,11 +117,11 @@
>  	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
>  	"mmcargs=setenv bootargs console=ttymxc0,${baudrate}
> root=${mmcroot}\0" \
>  	"loadbootscript=" \
> -		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> +		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>  	"bootscript=echo Running bootscript from mmc ...; " \
>  		"source\0" \
> -	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0"
> \
> -	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
> ${fdt_file}\0" \
> +	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> +	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
>  	"mmcboot=echo Booting from mmc ...; " \
>  		"run mmcargs; " \
>  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then "
> \
> --
> 1.8.4.5