[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

[Jagan Teki]

On 19 June 2015 at 13:20, Wang Haikun <Haikun.Wang at freescale.com> wrote:
> On 6/19/2015 3:34 PM, Jagan Teki wrote:
>> On 18 June 2015 at 12:24, Jagan Teki <jteki at openedev.com> wrote:
>>> On 18 June 2015 at 07:50, Wang Haikun <Haikun.Wang at freescale.com> wrote:
>>>> On 6/17/2015 8:30 PM, Simon Glass wrote:
>>>>> Hi,
>>>>>
>>>>> On 17 June 2015 at 03:36, Bin Meng <bmeng.cn at gmail.com> wrote:
>>>>>> Hi Haikun,
>>>>>>
>>>>>> On Mon, May 18, 2015 at 9:25 PM, Haikun Wang <haikun.wang at freescale.com> wrote:
>>>>>>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>>>>>>
>>>>>>> Enable Driver Model SPI for ls1021atwr board.
>>>>>>> DSPI and QSPI only be enabled when boot from QSPI.
>>>>>>> DSPI and QSPI are compatible under Driver Model SPI.
>>>>>>>
>>>>>>> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
>>>>>>> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d
>>
>> Where is this commit id? I couldn't see it on "git log"
> Hi Jagan,
>
> It is not a git commit ID, it is a code review task ID of gerrit in fact.
> I'm sorry again for forgetting remove it when submit patch.
>
> Best regards,
> Wang Haikun
>>
>>>>>>> Reviewed-on: http://git.am.freescale.net:8181/33447>
>>>> Best regards,
>>>> Wang Haikun
>>>>>
>>>>>>
>>>>>> Is this URL Freescale internal? I cannot access it.
>>>>>>
>>>>>
>>>>> Looks like it. BTW patman will remove these Gerrit tags automatically.
>>>> Yes, it is our internal URL.
>>>> I forget to remove it.
>>>> It couldn't be better if it will be removed automatically.
>>>
>>> I will remove if something not remove automatically.
>>>
>>> Anyone have any comments on these patch-set, I'm planning to take these.
>>>
>>> https://patchwork.ozlabs.org/patch/473391/
>>> https://patchwork.ozlabs.org/patch/473392/
>>> https://patchwork.ozlabs.org/patch/473393/
>>> https://patchwork.ozlabs.org/patch/473394/

Applied to u-boot-spi/master

thanks!
-- 
Jagan | openedev.