[U-Boot] MinnowBoard Max uboot

[Beaman, Thomas]

Hi Bin,

I have tried both suggestions and the kernel boot still hangs in the same place. I have enclosed a snipit from boot that shows the command line.

Thanks,
Tom

-----Original Message-----
From: Bin Meng [mailto:bmeng.cn at gmail.com] 
Sent: Thursday, June 18, 2015 9:16 PM
To: Beaman, Thomas
Cc: Simon Glass; u-boot at lists.denx.de
Subject: Re: [U-Boot] MinnowBoard Max uboot

> Can you try typing 'run ramboot' on the U-Boot shell to load linux kernel? Or below ...

> Or append acpi=off to the kernel command line manually, to see how it goes.


=> run ramboot
Using RTL8169#0 device
TFTP from server 10.40.101.102; our IP address is 10.40.101.244
Filename 'atom_64/kernel'.
Load address: 0x10000000
Loading: ##################################################  5.6 MiB
         3.6 MiB/s
done
Bytes transferred = 5861312 (596fc0 hex)
Using RTL8169#0 device
TFTP from server 10.40.101.102; our IP address is 10.40.101.244
Filename 'atom_64/ramdisk'.
Load address: 0x20000000
Loading: ##################################################  29.1 MiB
         3.5 MiB/s
done
Bytes transferred = 30497951 (1d15c9f hex)
Valid Boot Flag
Setup Size = 0x00003e00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.62-ltsi-WR6.0.0.20_standard (tbeaman at wocket) #1 SMP PREEMPT Wed Jun 17 15:19:47 EDT 2015
Building boot_params at 0x00090000
Loading bzImage at address 100000 (5845440 bytes)
Magic signature found
Initial RAM disk at linear address 0x20000000, size 30497951 bytes
Kernel command line: "root=/dev/ram rw ip=10.40.101.244:10.40.101.102::255.255.255.0:x86:eth0:off console=ttyS0,115200 acpi=off ramdisk_size=300000"

Starting kernel ...