[U-Boot] [PATCH] mmc: bcm2835_sdhci: Restore original delay behavior

[Marek Vasut]

Patch 33fe2fb8df01647f97a7bce96a1c7781a7f6d253 titled
"mmc: bcm283x: Remove get_timer_us() from mmc driver"
incorrectly replaced ad-hoc get_timer_us() function
with a plain get_timer(). The get_timer() operates in
mSec units instead of uSec though, which caused very
slow operation of the driver.

Restore the original behavior of the driver, but avoid
get_timer_us() and use timer_get_us() instead. The later
is part of the standard API.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Jakub Kiciński <moorray3 at wp.pl>
Cc: Stephen Warren <swarren at wwwdotorg.org>
---
 drivers/mmc/bcm2835_sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
index 078ef05..227d2df 100644
--- a/drivers/mmc/bcm2835_sdhci.c
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -69,11 +69,11 @@ static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
 	 * (Which is just as well - otherwise we'd have to nobble the DMA engine
 	 * too)
 	 */
-	while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay)
+	while (timer_get_us() - bcm_host->last_write < bcm_host->twoticks_delay)
 		;
 
 	writel(val, host->ioaddr + reg);
-	bcm_host->last_write = get_timer(0);
+	bcm_host->last_write = timer_get_us();
 }
 
 static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg)
-- 
2.1.4