[U-Boot] [PATCH v2 1/2] pci: Configure expansion ROM during auto config process

[Bin Meng]

Currently PCI expansion ROM address is assigned by a call to
pciauto_setup_rom() outside of the pci auto config process.
This does not work when expansion ROM is on a device behind
PCI bridge where bridge's memory limit register was already
programmed to a value that does not cover the newly assigned
expansion ROM address. To fix this, we should configure the
ROM address during the auto config process.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

---

Changes in v2:
- Handle header type 1 ROM address programming

 drivers/pci/pci_auto.c | 48 ++++++++++++++++++++++--------------------------
 drivers/pci/pci_rom.c  |  5 -----
 include/pci.h          |  9 ---------
 3 files changed, 22 insertions(+), 40 deletions(-)

diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 7c10983..e034ed1 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -87,6 +87,8 @@ void pciauto_setup_device(struct pci_controller *hose,
 	pci_size_t bar_size;
 	u16 cmdstat = 0;
 	int bar, bar_nr = 0;
+	u8 header_type;
+	int rom_addr;
 #ifndef CONFIG_PCI_ENUM_ONLY
 	pci_addr_t bar_value;
 	struct pci_region *bar_res;
@@ -182,38 +184,32 @@ void pciauto_setup_device(struct pci_controller *hose,
 		bar_nr++;
 	}
 
+	/* Configure the expansion ROM address */
+	pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
+	if (header_type != PCI_HEADER_TYPE_CARDBUS) {
+		rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
+			   PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
+		pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
+		pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
+		if (bar_response) {
+			bar_size = -(bar_response & ~1);
+			DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size);
+			if (pciauto_region_allocate(mem, bar_size,
+						    &bar_value) == 0) {
+				pci_hose_write_config_dword(hose, dev, rom_addr,
+							    bar_value);
+			}
+			cmdstat |= PCI_COMMAND_MEMORY;
+			DEBUGF("\n");
+		}
+	}
+
 	pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
 		CONFIG_SYS_PCI_CACHE_LINE_SIZE);
 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 }
 
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev)
-{
-	pci_addr_t bar_value;
-	pci_size_t bar_size;
-	u32 bar_response;
-	u16 cmdstat = 0;
-
-	pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS, 0xfffffffe);
-	pci_hose_read_config_dword(hose, dev, PCI_ROM_ADDRESS, &bar_response);
-	if (!bar_response)
-		return -ENOENT;
-
-	bar_size = -(bar_response & ~1);
-	DEBUGF("PCI Autoconfig: ROM, size=%#x, ", bar_size);
-	if (pciauto_region_allocate(hose->pci_mem, bar_size, &bar_value) == 0) {
-		pci_hose_write_config_dword(hose, dev, PCI_ROM_ADDRESS,
-					    bar_value);
-	}
-	DEBUGF("\n");
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
-	cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
-
-	return 0;
-}
-
 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 					 pci_dev_t dev, int sub_bus)
 {
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 37450c8..f364799 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -83,11 +83,6 @@ static int pci_rom_probe(pci_dev_t dev, uint class,
 	rom_address = CONFIG_X86_OPTION_ROM_ADDR;
 #else
 
-	if (pciauto_setup_rom(pci_bus_to_hose(PCI_BUS(dev)), dev)) {
-		debug("Cannot find option ROM\n");
-		return -ENOENT;
-	}
-
 	pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_address);
 	if (rom_address == 0x00000000 || rom_address == 0xffffffff) {
 		debug("%s: rom_address=%x\n", __func__, rom_address);
diff --git a/include/pci.h b/include/pci.h
index 07b1e9a..966be97 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -712,15 +712,6 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum,
 u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
 
 /**
- * pciauto_setup_rom() - Set up access to a device ROM
- *
- * @hose:	PCI hose to use
- * @dev:	PCI device to adjust
- * @return 0 if done, -ve on error
- */
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
-
-/**
  * pci_hose_find_devices() - Find devices by vendor/device ID
  *
  * @hose:	PCI hose to search
-- 
1.8.2.1