[U-Boot] [PATCH 03/11 v2] drivers/net/vsc9953: Add default configuration for VSC9953 L2 Switch
Codrin Ciubotariu
codrin.ciubotariu at freescale.com
Tue Jun 23 18:48:48 CEST 2015
At startup, the default configuration should be:
- enable HW learning on all ports (HW default);
- all ports are VLAN aware;
- all ports are members of VLAN 1;
- all ports have Port-based VLAN 1;
- on all ports, the switch is allowed to remove
maximum one VLAN tag,
- on egress, the switch should add a VLAN tag if the
frame is classified to a different VLAN than the port's
Port-based VLAN;
Signed-off-by: Johnson Leung <johnson.leung at freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---
Changes for v2:
- removed Change-id field;
drivers/net/vsc9953.c | 266 +++++++++++++++++++++++++++++++++++++++++++++++++-
include/vsc9953.h | 61 +++++++++++-
2 files changed, 325 insertions(+), 2 deletions(-)
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 720ae47..9dec683 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*
@@ -176,6 +176,268 @@ static int vsc9953_port_init(int port_no)
return 0;
}
+static int vsc9953_vlan_table_poll_idle(void)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+ int timeout;
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+
+ timeout = 50000;
+ while (((in_le32(&l2ana_reg->ana_tables.vlan_access) &
+ CONFIG_VSC9953_VLAN_CMD_MASK) !=
+ CONFIG_VSC9953_VLAN_CMD_IDLE) && --timeout)
+ udelay(1);
+
+ return !!timeout;
+}
+
+/* vlan table set/clear all membership of vid */
+static void vsc9953_vlan_table_membership_all_set(int vid, int set)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+
+ if (!vsc9953_vlan_table_poll_idle()) {
+ debug("VLAN table timeout\n");
+ return;
+ }
+
+ /* read current vlan configuration */
+ clrsetbits_le32(&l2ana_reg->ana_tables.vlan_tidx,
+ CONFIG_VSC9953_ANA_TBL_VID_MASK,
+ field_set(vid, CONFIG_VSC9953_ANA_TBL_VID_MASK));
+
+ clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access,
+ CONFIG_VSC9953_VLAN_CMD_MASK,
+ field_set(CONFIG_VSC9953_VLAN_CMD_READ,
+ CONFIG_VSC9953_VLAN_CMD_MASK));
+
+ if (!vsc9953_vlan_table_poll_idle()) {
+ debug("VLAN table timeout\n");
+ return;
+ }
+
+ clrsetbits_le32(&l2ana_reg->ana_tables.vlan_tidx,
+ CONFIG_VSC9953_ANA_TBL_VID_MASK,
+ field_set(vid, CONFIG_VSC9953_ANA_TBL_VID_MASK));
+
+ if (!set)
+ clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access,
+ CONFIG_VSC9953_VLAN_PORT_MASK |
+ CONFIG_VSC9953_VLAN_CMD_MASK,
+ field_set(CONFIG_VSC9953_VLAN_CMD_WRITE,
+ CONFIG_VSC9953_VLAN_CMD_MASK));
+ else
+ clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access,
+ CONFIG_VSC9953_VLAN_PORT_MASK |
+ CONFIG_VSC9953_VLAN_CMD_MASK,
+ field_set(CONFIG_VSC9953_VLAN_CMD_WRITE,
+ CONFIG_VSC9953_VLAN_CMD_MASK) |
+ CONFIG_VSC9953_VLAN_PORT_MASK);
+}
+
+/* Set PVID for a VSC9953 port */
+static void vsc9953_port_vlan_pvid_set(int port_no, int pvid)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+ struct vsc9953_rew_reg *l2rew_reg;
+
+ /* Administrative down */
+ if ((!vsc9953_l2sw.port[port_no].enabled)) {
+ printf("Port %d is administrative down\n", port_no);
+ return;
+ }
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+ l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET +
+ VSC9953_REW_OFFSET);
+
+ /* Set PVID on ingress */
+ clrsetbits_le32(&l2ana_reg->port[port_no].vlan_cfg,
+ CONFIG_VSC9953_VLAN_CFG_VID_MASK,
+ field_set(pvid, CONFIG_VSC9953_VLAN_CFG_VID_MASK));
+
+ /* Set PVID on egress */
+ clrsetbits_le32(&l2rew_reg->port[port_no].port_vlan_cfg,
+ CONFIG_VSC9953_PORT_VLAN_CFG_VID_MASK,
+ field_set(pvid, CONFIG_VSC9953_PORT_VLAN_CFG_VID_MASK));
+}
+
+static void vsc9953_port_all_vlan_pvid_set(int pvid)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_vlan_pvid_set(i, pvid);
+}
+
+/* Enable/disable vlan aware of a VSC9953 port */
+static void vsc9953_port_vlan_aware_set(int port_no, int enabled)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+
+ /* Administrative down */
+ if (!vsc9953_l2sw.port[port_no].enabled) {
+ printf("Port %d is administrative down\n", port_no);
+ return;
+ }
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+
+ if (enabled)
+ setbits_le32(&l2ana_reg->port[port_no].vlan_cfg,
+ CONFIG_VSC9953_VLAN_CFG_AWARE_ENA);
+ else
+ clrbits_le32(&l2ana_reg->port[port_no].vlan_cfg,
+ CONFIG_VSC9953_VLAN_CFG_AWARE_ENA);
+}
+
+/* Set all VSC9953 ports' vlan aware */
+static void vsc9953_port_all_vlan_aware_set(int enabled)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_vlan_aware_set(i, enabled);
+}
+
+/* Enable/disable vlan pop count of a VSC9953 port */
+static void vsc9953_port_vlan_popcnt_set(int port_no, int popcnt)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+
+ /* Administrative down */
+ if (!vsc9953_l2sw.port[port_no].enabled) {
+ printf("Port %d is administrative down\n", port_no);
+ return;
+ }
+
+ if (popcnt > 3 || popcnt < 0) {
+ printf("Invalid pop count value: %d\n", port_no);
+ return;
+ }
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+
+ clrsetbits_le32(&l2ana_reg->port[port_no].vlan_cfg,
+ CONFIG_VSC9953_VLAN_CFG_POP_CNT_MASK,
+ field_set(popcnt,
+ CONFIG_VSC9953_VLAN_CFG_POP_CNT_MASK));
+}
+
+/* Set all VSC9953 ports' pop count */
+static void vsc9953_port_all_vlan_poncnt_set(int popcnt)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_vlan_popcnt_set(i, popcnt);
+}
+
+/* Enable/disable learning for frames dropped due to ingress filtering */
+static void vsc9953_vlan_ingr_fltr_learn_drop(int enable)
+{
+ struct vsc9953_analyzer *l2ana_reg;
+
+ l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+ VSC9953_ANA_OFFSET);
+
+ if (enable)
+ setbits_le32(&l2ana_reg->ana.adv_learn,
+ CONFIG_VSC9953_VLAN_CHK);
+ else
+ clrbits_le32(&l2ana_reg->ana.adv_learn,
+ CONFIG_VSC9953_VLAN_CHK);
+}
+
+/* Egress untag modes of a VSC9953 port */
+enum egress_untag_mode {
+ EGRESS_UNTAG_ALL = 0,
+ EGRESS_UNTAG_PVID_AND_ZERO,
+ EGRESS_UNTAG_ZERO,
+ EGRESS_UNTAG_NONE,
+};
+
+static void vsc9953_port_vlan_egr_untag_set(int port_no,
+ enum egress_untag_mode mode)
+{
+ struct vsc9953_rew_reg *l2rew_reg;
+
+ /* Administrative down */
+ if (!vsc9953_l2sw.port[port_no].enabled) {
+ printf("Port %d is administrative down\n", port_no);
+ return;
+ }
+
+ l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET +
+ VSC9953_REW_OFFSET);
+
+ switch (mode) {
+ case EGRESS_UNTAG_ALL:
+ clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg,
+ CONFIG_VSC9953_TAG_CFG_MASK,
+ CONFIG_VSC9953_TAG_CFG_NONE);
+ break;
+ case EGRESS_UNTAG_PVID_AND_ZERO:
+ clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg,
+ CONFIG_VSC9953_TAG_CFG_MASK,
+ CONFIG_VSC9953_TAG_CFG_ALL_PVID_ZERO);
+ break;
+ case EGRESS_UNTAG_ZERO:
+ clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg,
+ CONFIG_VSC9953_TAG_CFG_MASK,
+ CONFIG_VSC9953_TAG_CFG_ALL_ZERO);
+ break;
+ case EGRESS_UNTAG_NONE:
+ clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg,
+ CONFIG_VSC9953_TAG_CFG_MASK,
+ CONFIG_VSC9953_TAG_CFG_ALL);
+ break;
+ default:
+ printf("Unknown untag mode for port %d\n", port_no);
+ }
+}
+
+static void vsc9953_port_all_vlan_egress_untagged_set(
+ enum egress_untag_mode mode)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_vlan_egr_untag_set(i, mode);
+}
+
+/*****************************************************************************
+At startup, the default configuration would be:
+ - HW learning enabled on all ports; (HW default)
+ - All ports are in VLAN 1;
+ - All ports are VLAN aware;
+ - All ports have POP_COUNT 1;
+ - All ports have PVID 1;
+ - All ports have TPID 0x8100; (HW default)
+ - All ports tag frames classified to all VLANs that are not PVID;
+*****************************************************************************/
+void vsc9953_default_configuration(void)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_VLAN; i++)
+ vsc9953_vlan_table_membership_all_set(i, 0);
+ vsc9953_port_all_vlan_aware_set(1);
+ vsc9953_port_all_vlan_pvid_set(1);
+ vsc9953_port_all_vlan_poncnt_set(1);
+ vsc9953_vlan_table_membership_all_set(1, 1);
+ vsc9953_vlan_ingr_fltr_learn_drop(1);
+ vsc9953_port_all_vlan_egress_untagged_set(EGRESS_UNTAG_PVID_AND_ZERO);
+}
+
void vsc9953_init(bd_t *bis)
{
u32 i, hdx_cfg = 0, phy_addr = 0;
@@ -306,6 +568,8 @@ void vsc9953_init(bd_t *bis)
}
}
+ vsc9953_default_configuration();
+
printf("VSC9953 L2 switch initialized\n");
return;
}
diff --git a/include/vsc9953.h b/include/vsc9953.h
index 2b88c5c..bf81623 100644
--- a/include/vsc9953.h
+++ b/include/vsc9953.h
@@ -7,7 +7,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013, 2015 Freescale Semiconductor, Inc.
*
*/
@@ -19,9 +19,13 @@
#include <asm/types.h>
#include <malloc.h>
+#define field_set(val, mask) ((val) * ((mask) & ~((mask) << 1)))
+#define field_get(val, mask) ((val) / ((mask) & ~((mask) << 1)))
+
#define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000)
#define VSC9953_SYS_OFFSET 0x010000
+#define VSC9953_REW_OFFSET 0x030000
#define VSC9953_DEV_GMII_OFFSET 0x100000
#define VSC9953_QSYS_OFFSET 0x200000
#define VSC9953_ANA_OFFSET 0x280000
@@ -84,9 +88,38 @@
#define CONFIG_VSC9953_VCAP_MV_CFG 0x0000ffff
#define CONFIG_VSC9953_VCAP_UPDATE_CTRL 0x01000004
+/* Macros for vsc9953_ana_port.vlan_cfg register */
+#define CONFIG_VSC9953_VLAN_CFG_AWARE_ENA 0x00100000
+#define CONFIG_VSC9953_VLAN_CFG_POP_CNT_MASK 0x000c0000
+#define CONFIG_VSC9953_VLAN_CFG_VID_MASK 0x00000fff
+
+/* Macros for vsc9953_rew_port.port_vlan_cfg register */
+#define CONFIG_VSC9953_PORT_VLAN_CFG_VID_MASK 0x00000fff
+
+/* Macros for vsc9953_ana_ana_tables.vlan_tidx register */
+#define CONFIG_VSC9953_ANA_TBL_VID_MASK 0x00000fff
+
+/* Macros for vsc9953_ana_ana_tables.vlan_access register */
+#define CONFIG_VSC9953_VLAN_PORT_MASK 0x00001ffc
+#define CONFIG_VSC9953_VLAN_CMD_MASK 0x00000003
+#define CONFIG_VSC9953_VLAN_CMD_IDLE 0x00000000
+#define CONFIG_VSC9953_VLAN_CMD_READ 0x00000001
+#define CONFIG_VSC9953_VLAN_CMD_WRITE 0x00000002
+#define CONFIG_VSC9953_VLAN_CMD_INIT 0x00000003
+
/* Macros for vsc9953_qsys_sys.switch_port_mode register */
#define CONFIG_VSC9953_PORT_ENA 0x00002000
+/* Macros for vsc9953_ana_ana.adv_learn register */
+#define CONFIG_VSC9953_VLAN_CHK 0x00000400
+
+/* Macros for vsc9953_rew_port.port_tag_cfg register */
+#define CONFIG_VSC9953_TAG_CFG_MASK 0x00000180
+#define CONFIG_VSC9953_TAG_CFG_NONE 0x00000000
+#define CONFIG_VSC9953_TAG_CFG_ALL_PVID_ZERO 0x00000080
+#define CONFIG_VSC9953_TAG_CFG_ALL_ZERO 0x00000100
+#define CONFIG_VSC9953_TAG_CFG_ALL 0x00000180
+
#define VSC9953_MAX_PORTS 10
#define VSC9953_PORT_CHECK(port) \
(((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1)
@@ -95,6 +128,9 @@
(port) < VSC9953_MAX_PORTS - 2 || (port) >= VSC9953_MAX_PORTS \
) ? 0 : 1 \
)
+#define VSC9953_MAX_VLAN 4096
+#define VSC9953_VLAN_CHECK(vid) \
+ (((vid) < 0 || (vid) >= VSC9953_MAX_VLAN) ? 0 : 1)
#define DEFAULT_VSC9953_MDIO_NAME "VSC9953_MDIO0"
@@ -342,6 +378,29 @@ struct vsc9953_system_reg {
/* END VSC9953 SYS structure for T1040 U-boot*/
+/* VSC9953 REW structure for T1040 U-boot*/
+
+struct vsc9953_rew_port {
+ u32 port_vlan_cfg;
+ u32 port_tag_cfg;
+ u32 port_port_cfg;
+ u32 port_dscp_cfg;
+ u32 port_pcp_dei_qos_map_cfg[16];
+ u32 reserved[12];
+};
+
+struct vsc9953_rew_common {
+ u32 reserve[4];
+ u32 dscp_remap_dp1_cfg[64];
+ u32 dscp_remap_cfg[64];
+};
+
+struct vsc9953_rew_reg {
+ struct vsc9953_rew_port port[12];
+ struct vsc9953_rew_common common;
+};
+
+/* END VSC9953 REW structure for T1040 U-boot*/
/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
--
1.9.3
More information about the U-Boot
mailing list