[U-Boot] [PATCH 04/11 v2] drivers/net/vsc9953: Refractor the parser for VSC9953 commands
Codrin Ciubotariu
codrin.ciubotariu at freescale.com
Tue Jun 23 18:48:49 CEST 2015
In order to support multiple commands to configure the VSC9953
L2 Switch, the parser needs to be changed to be more flexible and
to support more complex commands. This patch adds a parser that
searches for defined keywords in the command and calls the proper
function when a match is found. Also, the parser allows for
optional keywords, such as "port", to apply the command on a port
or on all ports. The already defined commands are also changed a
bit to:
ethsw [port <port_no>] { enable | disable | show }
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---
Changes for v2:
- removed Change-id field;
drivers/net/vsc9953.c | 381 ++++++++++++++++++++++++++++++++++++++++----------
1 file changed, 310 insertions(+), 71 deletions(-)
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 9dec683..4df751a 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -10,6 +10,7 @@
#include <asm/fsl_serdes.h>
#include <fm_eth.h>
#include <fsl_memac.h>
+#include <errno.h>
#include <vsc9953.h>
static struct vsc9953_info vsc9953_l2sw = {
@@ -575,6 +576,10 @@ void vsc9953_init(bd_t *bis)
}
#ifdef CONFIG_VSC9953_CMD
+
+#define VSC9953_MAX_CMD_PARAMS 20
+#define VSC9953_CMD_PORT_ALL -1
+
/* Enable/disable status of a VSC9953 port */
static void vsc9953_port_status_set(int port_no, u8 enabled)
{
@@ -595,15 +600,6 @@ static void vsc9953_port_status_set(int port_no, u8 enabled)
CONFIG_VSC9953_PORT_ENA);
}
-/* Set all VSC9953 ports' status */
-static void vsc9953_port_all_status_set(u8 enabled)
-{
- int i;
-
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_port_status_set(i, enabled);
-}
-
/* Start autonegotiation for a VSC9953 PHY */
static void vsc9953_phy_autoneg(int port_no)
{
@@ -615,15 +611,6 @@ static void vsc9953_phy_autoneg(int port_no)
printf("Failed to start PHY for port %d\n", port_no);
}
-/* Start autonegotiation for all VSC9953 PHYs */
-static void vsc9953_phy_all_autoneg(void)
-{
- int i;
-
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_phy_autoneg(i);
-}
-
/* Print a VSC9953 port's configuration */
static void vsc9953_port_config_show(int port_no)
{
@@ -685,75 +672,327 @@ static void vsc9953_port_config_show(int port_no)
printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
}
-/* Print VSC9953 ports' configuration */
-static void vsc9953_port_all_config_show(void)
-{
- int i;
+/* IDs used to track keywords in a command */
+enum keyword_id {
+ id_key_end = -1,
+ id_help,
+ id_show,
+ id_port,
+ id_enable,
+ id_disable,
+ id_count, /* keep last */
+};
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_port_config_show(i);
-}
+enum keyword_opt_id {
+ id_port_no = id_count + 1,
+ id_count_all, /* keep last */
+};
-/* function to interpret commands starting with "ethsw " */
-static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+struct command_def {
+ int cmd_to_keywords[VSC9953_MAX_CMD_PARAMS];
+ int cmd_keywords_nr;
+ int port;
+ int err;
+ int (*cmd_function)(struct command_def *parsed_cmd);
+};
+
+#define VSC9953_PORT_CONF_HELP "[port <port_no>] { enable | disable | show } " \
+"- enable/disable a port; show shows a port's configuration"
+
+static int vsc9953_port_status_key_func(struct command_def *parsed_cmd)
{
- u8 enable;
- u32 port;
+ int i;
+ u8 enabled;
- if (argc < 4)
+ /* Last keyword should tell us if we should enable/disable the port */
+ if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] ==
+ id_enable)
+ enabled = 1;
+ else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] ==
+ id_disable)
+ enabled = 0;
+ else {
+ parsed_cmd->err = 1;
return -1;
+ }
- if (strcmp(argv[1], "port"))
- return -1;
+ if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) {
+ vsc9953_port_status_set(parsed_cmd->port, enabled);
+ } else {
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_status_set(i, enabled);
+ }
+
+ return 0;
+}
+
+static int vsc9953_port_config_key_func(struct command_def *parsed_cmd)
+{
+ int i;
+
+ if (parsed_cmd->port != VSC9953_CMD_PORT_ALL) {
+ vsc9953_phy_autoneg(parsed_cmd->port);
+ printf("%8s %8s %8s %8s %8s\n",
+ "Port", "Status", "Link", "Speed",
+ "Duplex");
+ vsc9953_port_config_show(parsed_cmd->port);
- if (!strcmp(argv[3], "show")) {
- if (!strcmp(argv[2], "all")) {
- vsc9953_phy_all_autoneg();
- printf("%8s %8s %8s %8s %8s\n",
- "Port", "Status", "Link", "Speed",
- "Duplex");
- vsc9953_port_all_config_show();
- return 0;
- } else {
- port = simple_strtoul(argv[2], NULL, 10);
- if (!VSC9953_PORT_CHECK(port))
- return -1;
- vsc9953_phy_autoneg(port);
- printf("%8s %8s %8s %8s %8s\n",
- "Port", "Status", "Link", "Speed",
- "Duplex");
- vsc9953_port_config_show(port);
- return 0;
- }
- } else if (!strcmp(argv[3], "enable")) {
- enable = 1;
- } else if (!strcmp(argv[3], "disable")) {
- enable = 0;
} else {
- return -1;
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_phy_autoneg(i);
+ printf("%8s %8s %8s %8s %8s\n",
+ "Port", "Status", "Link", "Speed", "Duplex");
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_config_show(i);
}
- if (!strcmp(argv[2], "all")) {
- vsc9953_port_all_status_set(enable);
+ return 0;
+}
+
+struct keywords_to_function {
+ enum keyword_id cmd_keyword[VSC9953_MAX_CMD_PARAMS];
+ int (*keyword_function)(struct command_def *parsed_cmd);
+} cmd_def[] = {
+ {
+ .cmd_keyword = {
+ id_enable,
+ id_key_end,
+ },
+ .keyword_function = &vsc9953_port_status_key_func,
+ }, {
+ .cmd_keyword = {
+ id_disable,
+ id_key_end,
+ },
+ .keyword_function = &vsc9953_port_status_key_func,
+ }, {
+ .cmd_keyword = {
+ id_show,
+ id_key_end,
+ },
+ .keyword_function = &vsc9953_port_config_key_func,
+ },
+};
+
+struct keywords_optional {
+ enum keyword_id cmd_keyword[VSC9953_MAX_CMD_PARAMS];
+} cmd_opt_def[] = {
+ {
+ .cmd_keyword = {
+ id_port,
+ id_port_no,
+ id_key_end,
+ },
+ },
+};
+
+static int keyword_match_gen(enum keyword_id key_id, int argc,
+ char *const argv[], int *argc_nr,
+ struct command_def *parsed_cmd);
+static int keyword_match_port(enum keyword_id key_id, int argc,
+ char *const argv[], int *argc_nr,
+ struct command_def *parsed_cmd);
+
+/* Define properties for each keyword;
+ * keep the order synced with enum keyword_id
+ */
+struct keyword_def {
+ const char *keyword_name;
+ int (*match)(enum keyword_id key_id, int argc, char *const argv[],
+ int *argc_nr, struct command_def *parsed_cmd);
+} keyword[] = {
+ {
+ .keyword_name = "help",
+ .match = &keyword_match_gen,
+ }, {
+ .keyword_name = "show",
+ .match = &keyword_match_gen,
+ }, {
+ .keyword_name = "port",
+ .match = &keyword_match_port
+ }, {
+ .keyword_name = "enable",
+ .match = &keyword_match_gen,
+ }, {
+ .keyword_name = "disable",
+ .match = &keyword_match_gen,
+ },
+};
+
+/* Generic function used to match a keyword only by a string */
+static int keyword_match_gen(enum keyword_id key_id, int argc,
+ char *const argv[], int *argc_nr,
+ struct command_def *parsed_cmd)
+{
+ if (strcmp(argv[*argc_nr], keyword[key_id].keyword_name) == 0) {
+ parsed_cmd->cmd_to_keywords[*argc_nr] = key_id;
+
+ return 1;
+ }
+ return 0;
+}
+
+/* Function used to match the command's port */
+static int keyword_match_port(enum keyword_id key_id, int argc,
+ char *const argv[], int *argc_nr,
+ struct command_def *parsed_cmd)
+{
+ unsigned long val;
+
+ if (!keyword_match_gen(key_id, argc, argv, argc_nr, parsed_cmd))
return 0;
- } else {
- port = simple_strtoul(argv[2], NULL, 10);
- if (!VSC9953_PORT_CHECK(port))
- return -1;
- vsc9953_port_status_set(port, enable);
+
+ if (*argc_nr + 1 >= argc)
return 0;
+
+ if (strict_strtoul(argv[*argc_nr + 1], 10, &val) != -EINVAL) {
+ if (!VSC9953_PORT_CHECK(val)) {
+ printf("Invalid port number: %lu\n", val);
+ return 0;
+ }
+ parsed_cmd->port = val;
+ (*argc_nr)++;
+ parsed_cmd->cmd_to_keywords[*argc_nr] = id_port_no;
+ return 1;
+ }
+
+ return 0;
+}
+
+/* match optional keywords */
+static void cmd_keywords_opt_check(struct command_def *parsed_cmd,
+ int *argc_val)
+{
+ int i, keyw_opt_id, argc_val_max;
+
+ /* remember the best match */
+ argc_val_max = *argc_val;
+
+ for (i = 0; i < ARRAY_SIZE(cmd_opt_def); i++) {
+ keyw_opt_id = 0;
+ while (keyw_opt_id + *argc_val <
+ parsed_cmd->cmd_keywords_nr &&
+ cmd_opt_def[i].cmd_keyword[keyw_opt_id] != id_key_end &&
+ parsed_cmd->cmd_to_keywords[keyw_opt_id + *argc_val] ==
+ cmd_opt_def[i].cmd_keyword[keyw_opt_id])
+ keyw_opt_id++;
+ if (keyw_opt_id && keyw_opt_id + *argc_val <=
+ parsed_cmd->cmd_keywords_nr &&
+ cmd_opt_def[i].cmd_keyword[keyw_opt_id] == id_key_end &&
+ (*argc_val + keyw_opt_id > argc_val_max))
+ argc_val_max = *argc_val + keyw_opt_id;
}
- return -1;
+ *argc_val = argc_val_max;
}
-U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
+/* get the function to call based on keywords */
+static void cmd_keywords_check(struct command_def *parsed_cmd, int *argc_val)
+{
+ int i, keyword_id;
+
+ for (i = 0; i < ARRAY_SIZE(cmd_def); i++) {
+ keyword_id = 0;
+ while (keyword_id + *argc_val < parsed_cmd->cmd_keywords_nr &&
+ cmd_def[i].cmd_keyword[keyword_id] != id_key_end &&
+ parsed_cmd->cmd_to_keywords[keyword_id + *argc_val] ==
+ cmd_def[i].cmd_keyword[keyword_id])
+ keyword_id++;
+ if (keyword_id && keyword_id + *argc_val ==
+ parsed_cmd->cmd_keywords_nr &&
+ cmd_def[i].cmd_keyword[keyword_id] == id_key_end) {
+ *argc_val += keyword_id;
+ parsed_cmd->cmd_function = cmd_def[i].keyword_function;
+ return;
+ }
+ }
+}
+
+/* find all the keywords in the command */
+static void keywords_find(int argc, char * const argv[],
+ struct command_def *parsed_cmd)
+{
+ int i, j, argc_val;
+
+ for (i = 1; i < argc; i++) {
+ for (j = 0; j < id_count; j++) {
+ if (keyword[j].match(j, argc, argv, &i,
+ parsed_cmd))
+ break;
+ }
+ }
+
+ for (i = 1; i < argc; i++)
+ if (parsed_cmd->cmd_to_keywords[i] == -1)
+ parsed_cmd->err = 1;
+
+ parsed_cmd->cmd_keywords_nr = argc;
+ argc_val = 1;
+
+ /* get optional parameters first */
+ cmd_keywords_opt_check(parsed_cmd, &argc_val);
+
+ cmd_keywords_check(parsed_cmd, &argc_val);
+
+ /* error if not all commands' parameters were matched */
+ if (argc_val != parsed_cmd->cmd_keywords_nr ||
+ !parsed_cmd->cmd_function)
+ parsed_cmd->err = 1;
+}
+
+static void command_def_init(struct command_def *parsed_cmd)
+{
+ int i;
+
+ for (i = 0; i < VSC9953_MAX_CMD_PARAMS; i++)
+ parsed_cmd->cmd_to_keywords[i] = -1;
+
+ parsed_cmd->port = VSC9953_CMD_PORT_ALL;
+ parsed_cmd->err = 0;
+ parsed_cmd->cmd_function = NULL;
+}
+
+static void command_def_cleanup(struct command_def *parsed_cmd)
+{
+ /* Nothing to do for now */
+}
+
+/* function to interpret commands starting with "ethsw " */
+static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct command_def parsed_cmd;
+ int rc = 0;
+
+ if (argc >= VSC9953_MAX_CMD_PARAMS) {
+ rc = -1;
+ goto __ret;
+ }
+
+ command_def_init(&parsed_cmd);
+
+ keywords_find(argc, argv, &parsed_cmd);
+
+ if (!parsed_cmd.cmd_function) {
+ rc = -1;
+ goto __ret_cmd_cleanup;
+ }
+
+ rc = parsed_cmd.cmd_function(&parsed_cmd);
+
+ if (parsed_cmd.err) {
+ rc = -1;
+ goto __ret_cmd_cleanup;
+ }
+
+__ret_cmd_cleanup:
+ command_def_cleanup(&parsed_cmd);
+__ret:
+ return rc;
+}
+
+U_BOOT_CMD(ethsw, VSC9953_MAX_CMD_PARAMS, 0, do_ethsw,
"vsc9953 l2 switch commands",
- "port <port_no> enable|disable\n"
- " - enable/disable an l2 switch port\n"
- " port_no=0..9; use \"all\" for all ports\n"
- "ethsw port <port_no> show\n"
- " - show an l2 switch port's configuration\n"
- " port_no=0..9; use \"all\" for all ports\n"
+ VSC9953_PORT_CONF_HELP"\n"
);
+
#endif /* CONFIG_VSC9953_CMD */
--
1.9.3
More information about the U-Boot
mailing list