[U-Boot] [PATCH v3 07/54] dm: Reduce SPL device tree size

[Simon Glass]

The SPL device tree size must be minimised to save memory. Only include
properties that are needed by SPL - this is determined by the presence
of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of
unused properties from the nodes that remain.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Convert hex number to upper case to keep bc happy

Changes in v2:
- Add new patch to reduce SPL device tree size with fdtgrep

 Makefile                    |  2 +-
 arch/arm/cpu/u-boot-spl.lds |  2 +-
 dts/Kconfig                 | 12 ++++++++++++
 scripts/Makefile.spl        | 28 ++++++++++++++++++++++++++++
 4 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 0a674bf..4276f13 100644
--- a/Makefile
+++ b/Makefile
@@ -1258,7 +1258,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
 
 spl/u-boot-spl.bin: spl/u-boot-spl
 	@:
-spl/u-boot-spl: tools prepare
+spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
 	$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
 
 spl/sunxi-spl.bin: spl/u-boot-spl
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index a8be204..4b6e0f6 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -66,7 +66,7 @@ SECTIONS
 		 . = ALIGN(4);
 		__bss_end = .;
 	}
-
+	__bss_size = __bss_end - __bss_start;
 	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
diff --git a/dts/Kconfig b/dts/Kconfig
index 957f5c7..09cfefb 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -56,4 +56,16 @@ config DEFAULT_DEVICE_TREE
 	  It can be overridden from the command line:
 	  $ make DEVICE_TREE=<device-tree-name>
 
+config OF_SPL_REMOVE_PROPS
+	string "List of device tree properties to drop for SPL"
+	depends on OF_CONTROL && SPL
+	default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent"
+	help
+	  Since SPL normally runs in a reduced memory space, the device tree
+	  is cut down to only what is needed to load and start U-Boot. Only
+	  nodes marked with the property "u-boot,dm-pre-reloc" will be
+	  included. In addition, some properties are not used by U-Boot and
+	  can be discarded. This option defines the list of properties to
+	  discard.
+
 endmenu
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index fd572f4..bcc7ca2 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -151,6 +151,8 @@ boot.bin: $(obj)/u-boot-spl.bin
 
 ALL-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
 
+ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin
+
 ifdef CONFIG_SAMSUNG
 ALL-y	+= $(obj)/$(BOARD)-spl.bin
 endif
@@ -165,6 +167,32 @@ endif
 
 all:	$(ALL-y)
 
+quiet_cmd_cat = CAT     $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \
+		$(obj)/$(SPL_BIN).dtb FORCE
+	$(call if_changed,cat)
+
+# Create a file that pads from the end of u-boot-spl.bin to bss_end
+$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
+	@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
+	dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
+
+# Pass the original device tree file through fdtgrep twice. The first pass
+# removes any unwanted nodes (i.e. those which don't have the
+# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
+# pass removes various unused properties from the remaining nodes.
+# The output is typically a much smaller device tree file.
+quiet_cmd_fdtgrep = FDTGREP $@
+      cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \
+		-n /chosen -O dtb | \
+	$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+		$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+$(obj)/$(SPL_BIN).dtb: dts/dt.dtb
+	$(call cmd,fdtgrep)
+
 quiet_cmd_cpp_cfg = CFG     $@
 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
-- 
2.4.3.573.g4eafbef