[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash

Vikas Manocha vikas.manocha at st.com
Thu Jun 25 01:06:11 CEST 2015


This patchset enables cadence qspi controller for stv0991 soc, saves
environment in spi flash & moves CONFIG_OF in the defconfig file.

In fact it clubs two patchsets submitted earlier:
- [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
- [PATCH 0/3] stv0991: spi env & configs related board changes

Changed in v2:
- remove checkpatch.pl error from patch "stv0991: configure clock..."
- clubbed two patchsets mentioned above.

Vikas Manocha (6):
  stv0991: enable saving enrironment in spi flash
  stv0991: move OF_CONTROL config to defconfig
  stv0991: remove define CONFIG_OF_SEPARATE from board file
  stv0991: configure clock & pad muxing for qspi
  stv0991: enable cadence qspi controller & spi flash
  stv0991: configure device tree for cadence qspi & flash

 arch/arm/cpu/armv7/stv0991/clock.c                 |    4 ++-
 arch/arm/cpu/armv7/stv0991/pinmux.c                |    5 +++
 arch/arm/dts/stv0991.dts                           |   34 ++++++++++++++++++++
 arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |   15 +++++++++
 arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |    9 ++++++
 arch/arm/include/asm/arch-stv0991/stv0991_periph.h |    2 ++
 board/st/stv0991/stv0991.c                         |    8 +++++
 configs/stv0991_defconfig                          |    1 +
 include/configs/stv0991.h                          |   25 +++++++++++---
 9 files changed, 98 insertions(+), 5 deletions(-)

-- 
1.7.9.5



More information about the U-Boot mailing list