[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

Wang Haikun Haikun.Wang at freescale.com
Fri Jun 26 10:18:33 CEST 2015


On 6/26/2015 2:43 PM, Jagan Teki wrote:
> On 26 June 2015 at 08:43, Wang Haikun <Haikun.Wang at freescale.com> wrote:
>> On 6/25/2015 9:24 PM, Jagan Teki wrote:
>>> On 19 June 2015 at 13:44, Jagan Teki <jteki at openedev.com> wrote:
>>>> On 19 June 2015 at 13:20, Wang Haikun <Haikun.Wang at freescale.com> wrote:
>>>>> On 6/19/2015 3:34 PM, Jagan Teki wrote:
>>>>>> On 18 June 2015 at 12:24, Jagan Teki <jteki at openedev.com> wrote:
>>>>>>> On 18 June 2015 at 07:50, Wang Haikun <Haikun.Wang at freescale.com> wrote:
>>>>>>>> On 6/17/2015 8:30 PM, Simon Glass wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> On 17 June 2015 at 03:36, Bin Meng <bmeng.cn at gmail.com> wrote:
>>>>>>>>>> Hi Haikun,
>>>>>>>>>>
>>>>>>>>>> On Mon, May 18, 2015 at 9:25 PM, Haikun Wang <haikun.wang at freescale.com> wrote:
>>>>>>>>>>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>>>>>>>>>>
>>>>>>>>>>> Enable Driver Model SPI for ls1021atwr board.
>>>>>>>>>>> DSPI and QSPI only be enabled when boot from QSPI.
>>>>>>>>>>> DSPI and QSPI are compatible under Driver Model SPI.
>>>>>>>>>>>
>>>>>>>>>>> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
>>>>>>>>>>> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d
>>>>>>
>>>>>> Where is this commit id? I couldn't see it on "git log"
>>>>> Hi Jagan,
>>>>>
>>>>> It is not a git commit ID, it is a code review task ID of gerrit in fact.
>>>>> I'm sorry again for forgetting remove it when submit patch.
>>>>>
>>>>> Best regards,
>>>>> Wang Haikun
>>>>>>
>>>>>>>>>>> Reviewed-on: http://git.am.freescale.net:8181/33447>
>>>>>>>> Best regards,
>>>>>>>> Wang Haikun
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Is this URL Freescale internal? I cannot access it.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Looks like it. BTW patman will remove these Gerrit tags automatically.
>>>>>>>> Yes, it is our internal URL.
>>>>>>>> I forget to remove it.
>>>>>>>> It couldn't be better if it will be removed automatically.
>>>>>>>
>>>>>>> I will remove if something not remove automatically.
>>>>>>>
>>>>>>> Anyone have any comments on these patch-set, I'm planning to take these.
>>>>>>>
>>>>>>> https://patchwork.ozlabs.org/patch/473391/
>>>>>>> https://patchwork.ozlabs.org/patch/473392/
>>>
>>>>>>> https://patchwork.ozlabs.org/patch/473393/
>>>>>>> https://patchwork.ozlabs.org/patch/473394/
>>> Few CONFIG_DM_* were missing in these two patches, did these patches
>>> have any dependencies with other series, please look at and let me know.
>>
>> I found that macro IS_ENABLED(CONFIG_XXX) is only work with configure
>> option in Kconfig, and DM core code use IS_ENABLED(), so configure
>> option in head file can't work, so remove CONFIG_OF_CONTROL
>> CONFIG_OF_SEPARATE CONFIG_DM CONFIG_DM_SPI in the head file.
>
> Please send the patch for this fix, found build errors by picking these patches.
I plan to add those configure options CONFIG_OF_CONTROL CONFIG_DM 
CONFIG_DM_SPI to board defconfig.
>
> thanks!
>



More information about the U-Boot mailing list