[U-Boot] [PATCH v4 3/5] arm: ls102xa: Enable Driver Model SPI for ls1021aqds

Haikun Wang haikun.wang at freescale.com
Fri Jun 26 13:30:55 CEST 2015


Enable Driver Model SPI for ls1021aqds board.
DSPI and QSPI is enabled only when boot from QSPI.
DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
---
Changes in v4:
- Add defconfig patch in this series

Changes in v3:
- Remove CONFIG_SPI_FLASH_ATMEL
- IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig,
  and DM core code use IS_ENABLED(), so configure option in head file
  can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM CONFIG_DM_SPI

Changes in v2:
- Move all changes inside of CONFIG_QSPI_BOOT 

Changes in v1: None
 include/configs/ls1021aqds.h | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 9a8fd50..55f52e8 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -409,16 +409,25 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-/* QSPI */
+/* SPI */
 #ifdef CONFIG_QSPI_BOOT
+/* QSPI */
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE			0x40000000
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
+#define CONFIG_SPI_FLASH_SPANSION
 
+/* DSPI */
+#define CONFIG_FSL_DSPI
+
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 #define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SF_DATAFLASH
+#endif
 #endif
 
 /*
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list