[U-Boot] [PATCH v2 5/5] armv7: ls1021a: Enable OF_CONTROL and DM support for DSPI and QSPI in defconfig

[Haikun Wang]

DSPI and QSPI only work when boot from QSPI on ls1021a.
This patch only enable options in qspi boot defconfig.

Signed-off-by: Haikun Wang <haikun.wang at freescale.com>
---
Changes in v2:
- Add this defconfig patch to previous dataflash driver patches series

Test log on LS1021AQDS:
=> sf probe 1:0
SPI DataFlash: Detected at45db021d with page size 256 Bytes, erase size 256 Bytes, total 256 KiB, revision d
=> sf erase 0 40000
SF: 262144 bytes @ 0x0 Erased: OK
=> mw.b 82000000 33 40000
=> sf write 82000000 0 40000
SF: 262144 bytes @ 0x0 Written: OK
=> sf read 83000000 0 40000
SF: 262144 bytes @ 0x0 Read: OK
=> cmp.b 82000000 83000000 40000
Total of 262144 byte(s) were the same
=> sf probe 0:0
SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB

Test log on LS1021ATWR:
=> sf probe 0:0
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB

 configs/ls1021aqds_qspi_defconfig | 4 ++++
 configs/ls1021atwr_qspi_defconfig | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index c5372b7..61d4552 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -2,3 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_CMD_NET=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SPI=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 1ae0f9c..eb05f0a 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -2,3 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_CMD_NET=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SPI=y
-- 
2.1.0.27.g96db324