[U-Boot] [PATCH v2 7/8] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support

[Fabio Estevam]

Hi Peng,

On Thu, Jun 11, 2015 at 7:30 AM, Peng Fan <Peng.Fan at freescale.com> wrote:
> 1. Add DDR script for mx6qpsabreauto board.
> 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
>    and init the enet pll output to 125Mhz.
> 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.
>
> Build target: mx6qpsabreauto_config
>
> Boot Log:
> U-Boot 2015.07-rc2-00034-gba46bb1 (Jun 11 2015 - 16:46:41 +0800)
>
> CPU:   Freescale i.MX6Q rev2.0 996 MHz (running at 792 MHz)

Please make it to display i.MX6QP instead.

Regards,

Fabio Estevam