[U-Boot] [PATCH 3/7] imx6: standardise OCOTP and fuse config to mx6_common
Stefano Babic
sbabic at denx.de
Sat Jun 27 19:39:34 CEST 2015
On 24/06/2015 18:09, Peter Robinson wrote:
> According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature
> so centralise the config in mx6_common.h so functionality is standard
> across all boards
>
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> ---
> include/configs/aristainetos-common.h | 3 ---
> include/configs/embestmx6boards.h | 5 -----
> include/configs/gw_ventana.h | 5 -----
> include/configs/mx6_common.h | 4 ++++
> include/configs/mx6cuboxi.h | 2 --
> include/configs/mx6sabre_common.h | 5 -----
> include/configs/mx6slevk.h | 5 -----
> include/configs/mx6sxsabresd.h | 5 -----
> include/configs/nitrogen6x.h | 5 -----
> include/configs/novena.h | 6 ------
> include/configs/ot1200.h | 4 ----
> include/configs/platinum.h | 4 ----
> include/configs/tbs2910.h | 6 ------
> include/configs/tqma6.h | 4 ----
> include/configs/wandboard.h | 5 -----
> include/configs/warp.h | 4 ----
> 16 files changed, 4 insertions(+), 68 deletions(-)
>
> diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
> index eb50639..575f22d 100644
> --- a/include/configs/aristainetos-common.h
> +++ b/include/configs/aristainetos-common.h
> @@ -26,9 +26,6 @@
>
> #define CONFIG_MXC_UART
>
> -#define CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
>
> diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
> index 5dfd56c..85155f1 100644
> --- a/include/configs/embestmx6boards.h
> +++ b/include/configs/embestmx6boards.h
> @@ -29,11 +29,6 @@
>
> #define CONFIG_MXC_UART
>
> -#define CONFIG_CMD_FUSE
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> /* I2C Configs */
> #define CONFIG_CMD_I2C
> #define CONFIG_SYS_I2C
> diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
> index 6b8c82d..3d72832 100644
> --- a/include/configs/gw_ventana.h
> +++ b/include/configs/gw_ventana.h
> @@ -168,11 +168,6 @@
> #define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
> #define CONFIG_CMD_UBI
> #define CONFIG_RBTREE
> -#define CONFIG_CMD_FUSE /* eFUSE read/write support */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>
> /* Ethernet support */
> #define CONFIG_FEC_MXC
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index b37477a..2a0eb2a 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -112,4 +112,8 @@
> #define CONFIG_FSL_ESDHC
> #define CONFIG_FSL_USDHC
>
> +/* Fuses */
> +#define CONFIG_CMD_FUSE
> +#define CONFIG_MXC_OCOTP
> +
> #endif
> diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
> index 3d5bba7..634a09f 100644
> --- a/include/configs/mx6cuboxi.h
> +++ b/include/configs/mx6cuboxi.h
> @@ -20,8 +20,6 @@
> #define CONFIG_BOARD_EARLY_INIT_F
> #define CONFIG_BOARD_LATE_INIT
> #define CONFIG_MXC_UART
> -#define CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
>
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
> diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
> index c8c9f81..3ed4d23 100644
> --- a/include/configs/mx6sabre_common.h
> +++ b/include/configs/mx6sabre_common.h
> @@ -21,11 +21,6 @@
>
> #define CONFIG_MXC_UART
>
> -#define CONFIG_CMD_FUSE
> -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
>
> diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
> index 4b5c637..8cc9b5e 100644
> --- a/include/configs/mx6slevk.h
> +++ b/include/configs/mx6slevk.h
> @@ -193,9 +193,4 @@
>
> #define CONFIG_IMX6_THERMAL
>
> -#define CONFIG_CMD_FUSE
> -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> #endif /* __CONFIG_H */
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index 63ec7c6..6d5d244 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -178,11 +178,6 @@
>
> #define CONFIG_IMX6_THERMAL
>
> -#define CONFIG_CMD_FUSE
> -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> #define CONFIG_CMD_TIME
>
> #define CONFIG_FSL_QSPI
> diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
> index beaa119..b038dfe 100644
> --- a/include/configs/nitrogen6x.h
> +++ b/include/configs/nitrogen6x.h
> @@ -26,11 +26,6 @@
> #define CONFIG_USB_ETH_CDC
> #define CONFIG_NETCONSOLE
>
> -#define CONFIG_CMD_FUSE
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> #define CONFIG_MXC_UART
> #define CONFIG_MXC_UART_BASE UART2_BASE
>
> diff --git a/include/configs/novena.h b/include/configs/novena.h
> index 1dc9d83..eb7ebd1 100644
> --- a/include/configs/novena.h
> +++ b/include/configs/novena.h
> @@ -24,7 +24,6 @@
> #define CONFIG_CMD_DHCP
> #define CONFIG_CMD_EEPROM
> #define CONFIG_CMD_I2C
> -#define CONFIG_CMD_FUSE
> #define CONFIG_CMD_MII
> #define CONFIG_CMD_PCI
> #define CONFIG_CMD_PING
> @@ -117,11 +116,6 @@
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
> #define CONFIG_SYS_FSL_USDHC_NUM 2
>
> -/* OCOTP Configs */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> /* PCI express */
> #ifdef CONFIG_CMD_PCI
> #define CONFIG_PCI
> diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
> index 2bbf2b9..b2eb6f5 100644
> --- a/include/configs/ot1200.h
> +++ b/include/configs/ot1200.h
> @@ -16,10 +16,6 @@
> #define CONFIG_BOARD_EARLY_INIT_F
> #define CONFIG_MISC_INIT_R
>
> -/* FUSE Configs */
> -#define CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -
> /* UART Configs */
> #define CONFIG_MXC_UART
> #define CONFIG_MXC_UART_BASE UART1_BASE
> diff --git a/include/configs/platinum.h b/include/configs/platinum.h
> index fd19461..d651432 100644
> --- a/include/configs/platinum.h
> +++ b/include/configs/platinum.h
> @@ -23,7 +23,6 @@
>
> #define CONFIG_CMD_BMODE
> #define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_FUSE
> #define CONFIG_CMD_I2C
> #define CONFIG_CMD_MII
> #define CONFIG_CMD_MTDPARTS
> @@ -103,9 +102,6 @@
> #define CONFIG_APBH_DMA_BURST
> #define CONFIG_APBH_DMA_BURST8
>
> -/* Fuse support */
> -#define CONFIG_MXC_OCOTP
> -
> /* Environment in NAND */
> #define CONFIG_ENV_IS_IN_NAND
> #define CONFIG_ENV_OFFSET (16 << 20)
> diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
> index e1c9937..d97cba7 100644
> --- a/include/configs/tbs2910.h
> +++ b/include/configs/tbs2910.h
> @@ -167,12 +167,6 @@
> #define CONFIG_I2C_EDID
> #endif
>
> -/* Fuses */
> -#define CONFIG_CMD_FUSE
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> /* Environment organization */
> #define CONFIG_ENV_IS_IN_MMC
> #define CONFIG_SYS_MMC_ENV_DEV 2
> diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
> index 00294f6..37794fc 100644
> --- a/include/configs/tqma6.h
> +++ b/include/configs/tqma6.h
> @@ -100,10 +100,6 @@
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
>
> -/* Fuses */
> -#define CONFIG_MXC_OCOTP
> -#define CONFIG_CMD_FUSE
> -
> #define CONFIG_CMD_PING
> #define CONFIG_CMD_DHCP
> #define CONFIG_CMD_MII
> diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
> index f05b55a..f4e9cf2 100644
> --- a/include/configs/wandboard.h
> +++ b/include/configs/wandboard.h
> @@ -84,11 +84,6 @@
> #define CONFIG_IMX_HDMI
> #define CONFIG_IMX_VIDEO_SKIP
>
> -#define CONFIG_CMD_FUSE
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
> #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index 39b4919..2592ddb 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -97,10 +97,6 @@
> #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
> #define DFU_DEFAULT_POLL_TIMEOUT 300
>
> -/* Fuses */
> -#define CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "image=zImage\0" \
>
Acked-by: Stefano Babic <sbabic at denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list