[U-Boot] [PATCH 5/5] defconfig: ls1021a: Add OF_CONTROL and DM support

Jagan Teki jteki at openedev.com
Sat Jun 27 20:32:00 CEST 2015


From: Haikun Wang <Haikun.Wang at freescale.com>

PI and QSPI only work when boot from QSPI on ls1021a.
This patch only enable options in qspi boot defconfig.

Test log on LS1021AQDS:
=> sf probe 1:0
SPI DataFlash: Detected at45db021d with page size 256 Bytes, erase size 256 Bytes, total 256 KiB, revision d
=> sf erase 0 40000
SF: 262144 bytes @ 0x0 Erased: OK
=> mw.b 82000000 33 40000
=> sf write 82000000 0 40000
SF: 262144 bytes @ 0x0 Written: OK
=> sf read 83000000 0 40000
SF: 262144 bytes @ 0x0 Read: OK
=> cmp.b 82000000 83000000 40000
Total of 262144 byte(s) were the same
=> sf probe 0:0
SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB

Test log on LS1021ATWR:
=> sf probe 0:0
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB

Signed-off-by: Haikun Wang <haikun.wang at freescale.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
Changes in v7:
- Rebase to master

Changes in v2:
- Add this defconfig patch to previous dataflash driver patches series

 configs/ls1021aqds_qspi_defconfig | 4 ++++
 configs/ls1021atwr_qspi_defconfig | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index 1db9129..6a1f711 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -3,4 +3,8 @@ CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SPI=y
 CONFIG_SPI_FLASH=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 9eb88b3..420cfe7 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -3,4 +3,8 @@ CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SPI=y
 CONFIG_SPI_FLASH=y
-- 
1.9.1



More information about the U-Boot mailing list