[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash

[Jagan Teki]

On 25 June 2015 at 04:36, Vikas Manocha <vikas.manocha at st.com> wrote:
> This patchset enables cadence qspi controller for stv0991 soc, saves
> environment in spi flash & moves CONFIG_OF in the defconfig file.
>
> In fact it clubs two patchsets submitted earlier:
> - [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
> - [PATCH 0/3] stv0991: spi env & configs related board changes

I'm OK, with this series and commented about v2, 6/6

Please rebase all these 6 patches + 3 patches on to u-boot-spi/next-dev [1]
[PATCH v2 0/3] spi: cadence_qspi: sram depth from DT & fix for FIFO

So send all 9 patches with fix on v2, 6/6 at once.

[1] http://git.denx.de/?p=u-boot/u-boot-spi.git;a=shortlog;h=refs/heads/next-dev

>
> Changed in v2:
> - remove checkpatch.pl error from patch "stv0991: configure clock..."
> - clubbed two patchsets mentioned above.
>
> Vikas Manocha (6):
>   stv0991: enable saving enrironment in spi flash
>   stv0991: move OF_CONTROL config to defconfig
>   stv0991: remove define CONFIG_OF_SEPARATE from board file
>   stv0991: configure clock & pad muxing for qspi
>   stv0991: enable cadence qspi controller & spi flash
>   stv0991: configure device tree for cadence qspi & flash
>
>  arch/arm/cpu/armv7/stv0991/clock.c                 |    4 ++-
>  arch/arm/cpu/armv7/stv0991/pinmux.c                |    5 +++
>  arch/arm/dts/stv0991.dts                           |   34 ++++++++++++++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |   15 +++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |    9 ++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_periph.h |    2 ++
>  board/st/stv0991/stv0991.c                         |    8 +++++
>  configs/stv0991_defconfig                          |    1 +
>  include/configs/stv0991.h                          |   25 +++++++++++---
>  9 files changed, 98 insertions(+), 5 deletions(-)

thanks!
-- 
Jagan | openedev.