[U-Boot] [PATCH v1 3/9] arm: mvebu: Add SDIO/SDHCI support for Armada A38x

[Stefan Roese]

Armada A38x implements an SDHCI compatible SDIO controller. This patch
enables the Marvell driver to support this SoC. And enables the
SDIO controller if selected by the board configuration.

Tested on Marvell DB-88F6820-GP board.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Pantelis Antoniou <panto at antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov at sartura.hr>
---

 arch/arm/mach-mvebu/cpu.c               | 11 +++++++++++
 arch/arm/mach-mvebu/include/mach/cpu.h  |  2 ++
 arch/arm/mach-mvebu/include/mach/gpio.h | 10 ++++++++++
 arch/arm/mach-mvebu/include/mach/soc.h  |  1 +
 4 files changed, 24 insertions(+)
 create mode 100644 arch/arm/mach-mvebu/include/mach/gpio.h

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 0121db8..531d0fb 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -10,6 +10,7 @@
 #include <asm/pl310.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
+#include <sdhci.h>
 
 #define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
 #define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
@@ -245,6 +246,16 @@ int cpu_eth_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_MV_SDHCI
+int board_mmc_init(bd_t *bis)
+{
+	mv_sdh_init(MVEBU_SDIO_BASE, 0, 0,
+		    SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_WAIT_SEND_CMD);
+
+	return 0;
+}
+#endif
+
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 3b48460..4bdb633 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -114,6 +114,8 @@ void mvebu_sdram_size_adjust(enum memory_bank bank);
 int mvebu_mbus_probe(struct mbus_win windows[], int count);
 int mvebu_soc_family(void);
 
+int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks);
+
 /*
  * Highspeed SERDES PHY config init, ported from bin_hdr
  * to mainline U-Boot
diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h
new file mode 100644
index 0000000..09e3c50
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/gpio.h
@@ -0,0 +1,10 @@
+/*
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __MACH_MVEBU_GPIO_H
+#define __MACH_MVEBU_GPIO_H
+
+/* Empty file - sdhci requires this. */
+
+#endif
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 0a9307c..1aeec27 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -51,6 +51,7 @@
 #define MVEBU_REG_PCIE_BASE	(MVEBU_REGISTER(0x40000))
 #define MVEBU_EGIGA0_BASE	(MVEBU_REGISTER(0x70000))
 #define MVEBU_EGIGA1_BASE	(MVEBU_REGISTER(0x74000))
+#define MVEBU_SDIO_BASE		(MVEBU_REGISTER(0xd8000))
 
 #define SDRAM_MAX_CS		4
 #define SDRAM_ADDR_MASK		0xFF000000
-- 
2.4.5