[U-Boot] [PATCH 06/20] sf: Kconfig: Add SPI_FLASH_MTD entry

[Jagan Teki]

On 29 June 2015 at 21:25, Daniel Schwierzeck
<daniel.schwierzeck at gmail.com> wrote:
> 2015-06-27 20:13 GMT+02:00 Jagan Teki <jteki at openedev.com>:
>> Added SPI_FLASH_MTD entry on Kconfig with help description.
>>
>> Signed-off-by: Jagan Teki <jteki at openedev.com>
>> Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
>> Cc: Heiko Schocher <hs at denx.de>
>> ---
>>  drivers/mtd/spi/Kconfig | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
>> index 9536aac..217e4d7 100644
>> --- a/drivers/mtd/spi/Kconfig
>> +++ b/drivers/mtd/spi/Kconfig
>> @@ -35,4 +35,16 @@ config SPI_FLASH
>>
>>           If unsure, say N
>>
>> +config SPI_FLASH_MTD
>> +       bool "SPI Flash MTD support"
>> +       depends on SPI_FLASH
>> +       help
>> +          Enable the MTD support for spi flash layer, this adapter is for
>> +         translating mtd_read/mtd_write commands into spi_flash_read/write
>> +         commands. It is not intended to use it within sf_cmd or the SPI
>> +         flash subsystem. Such an adapter is needed for subsystems like
>> +         UBI which can only operate on top of the MTD layer.
>> +
>> +         If unsure, say N
>> +
>>  endmenu # menu "SPI Flash Support"
>> --
>> 1.9.1
>>
>
> looks good. Maybe you also should remove that help text from the README file.

Thought the same, will send the patch.

>
> Acked-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
>

thanks!
-- 
Jagan | openedev.