[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash
Jagan Teki
jteki at openedev.com
Mon Jun 29 20:14:54 CEST 2015
On 29 June 2015 at 23:14, Vikas MANOCHA <vikas.manocha at st.com> wrote:
> Thanks Jagan,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jteki at openedev.com]
>> Sent: Sunday, June 28, 2015 3:57 AM
>> To: Vikas MANOCHA
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi
>> flash
>>
>> On 25 June 2015 at 04:36, Vikas Manocha <vikas.manocha at st.com> wrote:
>> > This patchset enables cadence qspi controller for stv0991 soc, saves
>> > environment in spi flash & moves CONFIG_OF in the defconfig file.
>> >
>> > In fact it clubs two patchsets submitted earlier:
>> > - [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
>> > - [PATCH 0/3] stv0991: spi env & configs related board changes
>>
>> I'm OK, with this series and commented about v2, 6/6
>>
>> Please rebase all these 6 patches
>
> Ok, I will rebase these 6 on u-boot-spi/next-dev, add doc as per your v2, 6/6 comment & send the v3.
>
>> + 3 patches on to u-boot-spi/next-dev [1]
>> [PATCH v2 0/3] spi: cadence_qspi: sram depth from DT & fix for FIFO
>
> I checked these 3 patches & can be applied to spi-next-dev without any modification.
I wasn't able to apply these 3 at-lest - please rebase all 9 against
this branch and send.
>
>>
>> So send all 9 patches with fix on v2, 6/6 at once.
>>
>> [1] http://git.denx.de/?p=u-boot/u-boot-
>> spi.git;a=shortlog;h=refs/heads/next-dev
>>
>> >
>> > Changed in v2:
>> > - remove checkpatch.pl error from patch "stv0991: configure clock..."
>> > - clubbed two patchsets mentioned above.
>> >
>> > Vikas Manocha (6):
>> > stv0991: enable saving enrironment in spi flash
>> > stv0991: move OF_CONTROL config to defconfig
>> > stv0991: remove define CONFIG_OF_SEPARATE from board file
>> > stv0991: configure clock & pad muxing for qspi
>> > stv0991: enable cadence qspi controller & spi flash
>> > stv0991: configure device tree for cadence qspi & flash
>> >
>> > arch/arm/cpu/armv7/stv0991/clock.c | 4 ++-
>> > arch/arm/cpu/armv7/stv0991/pinmux.c | 5 +++
>> > arch/arm/dts/stv0991.dts | 34 ++++++++++++++++++++
>> > arch/arm/include/asm/arch-stv0991/stv0991_cgu.h | 15 +++++++++
>> > arch/arm/include/asm/arch-stv0991/stv0991_creg.h | 9 ++++++
>> > arch/arm/include/asm/arch-stv0991/stv0991_periph.h | 2 ++
>> > board/st/stv0991/stv0991.c | 8 +++++
>> > configs/stv0991_defconfig | 1 +
>> > include/configs/stv0991.h | 25 +++++++++++---
>> > 9 files changed, 98 insertions(+), 5 deletions(-)
thanks!
--
Jagan | openedev.
More information about the U-Boot
mailing list