[U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash

[Jagan Teki]

On 30 June 2015 at 00:26, Vikas MANOCHA <vikas.manocha at st.com> wrote:
> Hi Jagan,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jteki at openedev.com]
>> Sent: Monday, June 29, 2015 11:15 AM
>> To: Vikas MANOCHA
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi
>> flash
>>
>> On 29 June 2015 at 23:14, Vikas MANOCHA <vikas.manocha at st.com> wrote:
>> > Thanks Jagan,
>> >
>> >> -----Original Message-----
>> >> From: Jagan Teki [mailto:jteki at openedev.com]
>> >> Sent: Sunday, June 28, 2015 3:57 AM
>> >> To: Vikas MANOCHA
>> >> Cc: u-boot at lists.denx.de
>> >> Subject: Re: [U-Boot] [v2 0/6] stv0991: enable cadence qspi
>> >> controller & spi flash
>> >>
>> >> On 25 June 2015 at 04:36, Vikas Manocha <vikas.manocha at st.com>
>> wrote:
>> >> > This patchset enables cadence qspi controller for stv0991 soc,
>> >> > saves environment in spi flash & moves CONFIG_OF in the defconfig
>> file.
>> >> >
>> >> > In fact it clubs two patchsets submitted earlier:
>> >> > - [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
>> >> > - [PATCH 0/3] stv0991: spi env & configs related board changes
>> >>
>> >> I'm OK, with this series and commented about v2, 6/6
>> >>
>> >> Please rebase all these 6 patches
>> >
>> > Ok, I will rebase these 6 on u-boot-spi/next-dev, add doc as per your v2,
>> 6/6 comment & send the v3.
>> >
>> >> + 3 patches on to u-boot-spi/next-dev [1]
>> >> [PATCH v2 0/3] spi: cadence_qspi: sram depth from DT & fix for FIFO
>> >
>> > I checked these 3 patches & can be applied to spi-next-dev without any
>> modification.
>>
>> I wasn't able to apply these 3 at-lest - please rebase all 9 against this branch
>> and send.
>
> You are right, I will rebase these 3 also & send the v3 for them.
> Also about your comment on stv0991 patchset v2, 6/6 of adding binding doc : It is more relevant for the cadence_qspi.
> Do you mind if I add this binding document as 4th patch in this patchset ?

Sure, send them all at once.

>> >
>> >>
>> >> So send all 9 patches with fix on v2, 6/6 at once.
>> >>
>> >> [1] http://git.denx.de/?p=u-boot/u-boot-
>> >> spi.git;a=shortlog;h=refs/heads/next-dev
>> >>
>> >> >
>> >> > Changed in v2:
>> >> > - remove checkpatch.pl error from patch "stv0991: configure clock..."
>> >> > - clubbed two patchsets mentioned above.
>> >> >
>> >> > Vikas Manocha (6):
>> >> >   stv0991: enable saving enrironment in spi flash
>> >> >   stv0991: move OF_CONTROL config to defconfig
>> >> >   stv0991: remove define CONFIG_OF_SEPARATE from board file
>> >> >   stv0991: configure clock & pad muxing for qspi
>> >> >   stv0991: enable cadence qspi controller & spi flash
>> >> >   stv0991: configure device tree for cadence qspi & flash
>> >> >
>> >> >  arch/arm/cpu/armv7/stv0991/clock.c                 |    4 ++-
>> >> >  arch/arm/cpu/armv7/stv0991/pinmux.c                |    5 +++
>> >> >  arch/arm/dts/stv0991.dts                           |   34 ++++++++++++++++++++
>> >> >  arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |   15 +++++++++
>> >> >  arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |    9 ++++++
>> >> >  arch/arm/include/asm/arch-stv0991/stv0991_periph.h |    2 ++
>> >> >  board/st/stv0991/stv0991.c                         |    8 +++++
>> >> >  configs/stv0991_defconfig                          |    1 +
>> >> >  include/configs/stv0991.h                          |   25 +++++++++++---
>> >> >  9 files changed, 98 insertions(+), 5 deletions(-)

thanks!
-- 
Jagan | openedev.